Feature

●【FEATURE】 DC 12V 300mA 5N Force 10mm Stroke Push Pull Solenoid Electromagnet
●【GOOD DESIGN】Push pull Type, linear motion, open frame, plunger spring return, DC solenoid electromagnet.
●【ADVANTAGES】 Simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electrical conductivity
●【NOTED】As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.The best operate time is in 2 seconds.
●【APPLICATION】DC solenoid electromagnet use in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,auto door lock,etc.


Description

Specifications:
Material: Metal(Soft magnetic)
Type: Push and Pull Force
Force: 5N
Travel: 10mm
Rated Voltage: DC 12V
Current: 300mA
Power: 12W
Total Length: 6cm/2.36"
Push Bar Dia: 6mm/0.24"
Mounting Hole Dia: M3
Size: 30 x 14 x 17mm/1.18" x 0.55" x 0.67"(L*W*H)
Cord length 17cm / 6.7"
Package Content: 1 x DC Solenoid Electromagnet

Range of application:
1. Swimming instruments; A variety of coin pickers
2. Vending machines; Various vending machines currency changer ticket machines
3.Office equipment; List machine computer equipment fax machine clocking machine, Photocopier typewriter cash register plotter drink machine
4. Transportation equipment; Automatic door lock safety belt lock car solenoid valve parking equipment
5. Household appliances; Recorder, video recorder, electronic organ, automatic knitting machine, singing machine
6. other; Packaging machine manipulator farming and animal husbandry equipment stamping equipment, fire protection, alarm water saving electromagnetic valve

Test environment:
1. Ambient temperature: 23±2℃.
2. Relative humidity: 50±10%.
3. Atmospheric pressure: 1013MPa.
4. Insulation resistance: When measuring with 500VDC insulation resistance, the insulation resistance between the coil and the yoke must be at least 100MΩ.

Note:
1.Please pay attention:As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time.
2.The best operate time is in 2 seconds.If the operate time is too long,the electromagnet temperature will rise.Too high temperature can affect the life of the electromagnet.
3.Please take the electromagnet put down gently when you install it.