Feature

●Specifications: Chain No.: 08A(#40); Total Length: 23.8mm / 0.94-inch; Roller Diameter: 7.92mm / 0.31-inch; Pin Length: 17.75mm / 0.7-inch; Pin Diameter: 3.96mm / 0.16-inch; Inner Plate Depth: 12mm / 0.47-inch; Pitch: 1/2-inch / 12.7mm; Width Between Inner Plates: 7.85mm / 0.31-inch; Average Tensile Strenght:17.5kN; 10 x Connector Offset Half Link Roller
●Material: Made of carbon steel materials, finely processing, precision processing, strong, anti-oxidation, and durable.
●Appliance: This chain link roller connector is Easy for drive chains. Regular cleaning and lubrication can extend service life.
●How to Use: You can use appropriately sized circlip pliers to take apart the old chain link roller and remove it from the chain. To install the new chain joint, insert the pin first, then snap the spring clip in. Wear gloves carefully for safety.
●Note: Please pay attention to the size and model before ordering.


Description

11231123

11231123

11231123

11231123

11231123

Connector Offset Half Link Roller

  • Please select the appropriate link according to the model of the chain.
  • Use a suitable tool to remove the link spring pin, which will improve the efficiency of the replacement.

Connector Link Roller

  • Please select the appropriate link according to the model of the chain.
  • Use a suitable tool to remove the link circlip, which will improve the efficiency of the replacement.

Connector Offset Half Link Roller

  • Offset Half Link Roller are used to shorten chain by one pitch.
  • This product can only be used as the connector of the chain, and cannot be installed on the chain in more than one, so as to avoid affecting the performance of the chain.

Connector Link Roller

  • Please check the description to confirm the compatibility before purchase.
  • This product can only be used as the connector of the chain, and cannot be installed on the chain in more than one, so as to avoid affecting the performance of the chain.