Feature(may vary by option.)

●Align the pressure tap with the tire, and then squeeze it hard to keep the air tight. The tire pressure gauge will automatically display the reading.
●Measure tire pressure, gently press the power button, four units intelligent switch: 0-150psi, 0-10bar, 0-10kg / cm² , 0-1000kpa.
●Direct repeated measurement, no need to shut down to zero, standby 30 seconds automatically shut down or long press shutdown.
●Used for measurement of cars, bicycles, balls, rubber boats and other products. It has a wide range of applications and gives you a safe and healthy journey.
●Please contact us if you have any questions, we are always here to satisfy all of you.


Description

Maintaining correct tire pressure will:
-Reduce tire wear and extend tire life
-Increase fuel efficiency
-Improve vehicle handling and safety
Specification:
Pressure Range:
-0 ~ 150 PSI
-0 ~ 10 Bar
-0 ~ 1000 Kpa
-0 ~ 10 Kg/cm2
Digital Display: 21 × 10mm LCD Display
Power Source: (Ready to Use)
-3 × LR44 1.5V Button Cells
Operating Temperatures: 23 °F ~ 122 °F
Minimum Increment: 0.1 PSI
Instruction:
-Press the “Power” button. Then wait for 0 to display.
-Place the nozzle of the gauge into the tire valve. Press firmly to ensure a good seal to prevent air from leaking.
-Keep gauge on the valve until the reading on the LCD display is set.
Disconnect the gauge, then read pressure.
-To retake the reading, simply place the nozzle of the gauge into the tire valve again and repeat.
-The gauge will automatically shut off 30 seconds after use. The gauge can also be manually shut off by pressing down on the “Power” button until LCD display is off.
Warning:
Inflate tires to manufacturer’s recommended pressure only. Over inflating or under inflating tires can create potentially hazardous driving conditions.