Feature

●1.App Control & RF Remote Control&Button Control: Our car atmosphere light uses wireless APP or remote or button for control suitable for IOS or Andriod. Choose any color you like from 16 million colors. Built-in 29 preset modes, APP control to turn lights on or off, dim or brighten and even adjust the speed of mode.
●2.Safe to Use: The interior car lights has a working voltage of 12V, equipped with short circuit protection and memory function. Waterproof, extremely low-heat,the product is installed in the gap touchable and safety for children.
●3.The length of the installed Optical fiber exceeds 100inch. If the brightness of the Optical fiber end is dark, it is recommended to add 1Pc RGB LED light at the end to make the Optical fiber cable meet the brightness requirements.
●4.Sound Active Effects: The car led lights interior is equipped with sound sensors that lets the LED lights synchronized with music beat. The LED music light strip follow the beat and adjusts flashing to fit the strength of the sound.
●5.Package Contents: 5 in 1 RGB LED Strip Light Kit, 1 x Optic Fiber (236 inches) ,1 x PVC Transparent Tube(236 inches) ,1 x Car Charger (Built-in Fuse) ,1 x Installation instructions,1 x remote,1 x button

Description

Why Choose JINRUITOP Interior Car LED Strip Lights?

Enjoy over 16 million colors and 29 dynamic modes. You also can DIY your own mode. APP and remote control, turn on/off, adjust brightness, timing, music mode. Its very convenient and safety when you are driving. With a built-in sensitive microphone, the LED music light strip follows the beat and adjusts the flicker to adapt to the intensity of the sound. Suitable for almost cars, trucks, SUVs, RVs, campers, trailers, boats, golf carts, etc. Its a great gift for her/him on birthday, fathers day, Christmas.

Installation Steps:

Cut the transparent tube according to the length of the position you want to install. Pass the optical fiber through the transparent tube. Use pry tool to squeeze the transparent tube into the gap. Connect the optical fiber to the LED and tighten the screws. Hide wires and LEDs. If apart car door: Hide it in the car door or center console and instrument panel. If not apart car door: You can hide the LED under the foot pad or paste it on the floor or other places you like. Tips: Please test the light before installation. (Turn on the car charger button switch) It may be difficult to pass all the optical fibers through the transparent tube. You can cut the transparent tube to a suitable length, and then pass the optical fiber through.

Product information