Feature(may vary by option.)
●Material: Made of brass for durability and corrosion-resistance. Will not rust, ensuring long-lasting use.
●Good quality: Top tight design for high torque with rigidity, low inertia, and excellent sensitivity. No rotation gap for symmetrical angular misalignment.
●Size: Total size 22mm x 14mm/0.866 x 0.551inch (LxD) and M4 screws,Bore size: 6mm to 6mm/0.236 to 0.236 inch. ensuring compatibility with many motors and threaded rods.
●Easy to install: select the appropriate size, remove old connector, and install new shaft coupling for seamless machine operation.
●Widely use: Connects motor and threaded rod for smooth machine operation. Ideal for 3D printers, model cars, boats, and airplanes.
[6mm to 6mm 5]
Description
What is this?
Shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
Advantages of the Shaft Coupler
1. Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
2. Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.
3.No rotation gap and elastic action can make up for symmetrical angular misalignment.
How to use it?
Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
Pacakge include:
5Pcs Rigid Coupling Connector
20Pcs M4 Screws
2pcs wrench