Tortoloid Pickguard Material
Tigerstripe
Especially for Gibson acoustic guitars. Amber for soundboards with a light sunburst or natural finish, and red to complement typical darker sunbursts.
Tortoloid is a handsome pickguard material developed and handmade by luthier Mario Proulx. Poured resins and dyes reproduce authentic tortoise shell patterns: tigerstripe, tortoise, and swirl. Tortoloid is a popular choice for making vintage-style guitars look even more vintage. Unhappy with modern "printed" pickguards? Tortoloid is a great alternative.
Each Tortoloid sheet is individually made. Just like natural shell, no two have the exact same pattern. The highly durable material is 0.025" thin, flexible, and resists shrinkage.
Tortoloid cuts easily with scissors, but to avoid chipping the edges, warm the material in hot water or with a hair dryer first. The cut edges can be sanded and polished, or beveled with a razor blade (work at room temperature for a sharp bevel, or warm the material for a rounded edge). Bending is easily corrected by placing the material on a flat surface and warming it.
Two sizes:
4-3/4" x 7-1/2" x 0.025" (120.65mm x 190.50mm x 0.64mm)
Enough material for most traditional pickguard shapes.
4-15/16" x 10" x 0.025" (125.41mm x 254mm x 0.64mm)
Oversized is for larger pickguards, such as Gibson J45s and J50s.
Note: You may notice small abrasions on the underside of the material. These are from the manufacturing process and will become invisible after installation with our Pickguard Adhesive Sheet.