Feature

●Quieter Operation: Pump assembly is built to last, featuring quality materials and robust construction, meets OEM standards, minimizing noise and vibrations, helps create a more peaceful driving experience, enhancing overall vehicle comfort
●Efficient and Smooth Steering: YHTAUTO power steering pump is designed to provide efficient and smooth steering, reducing the effort required to turn the steering wheel, enhances driving maneuverability, fixed stiff steering problem
●Fit The Following Vehicles: This power steering pump with pulley & reservoir is a direct replacement for Chevrolet Impala 2006-2011 V6 3.5L/3.9L, Monte Carlo 2006-2007 V6 3.5L, Monte Carlo 2006 V6 3.9L. Please make sure the fitment before your order.
●Effortless Install: Easy installation saves time and effort, allows you to quickly upgrade or replace existing power steering systems. Replacement for OEM part number: 20-69989, 2069989, 88964571, 15267585, 88964358, 88964571
●Improve Comfort: Replacing a good power assist pump can maintain better control of your vehicle. If your car has the following signs, please pay attention to whether the pump needs to be replaced: Leaks, whining or squealing noises from the pump


Description

11
11

Item Specification

Item Type: Power Steering Pump

Pulley Included: with Pulley

Reservoir Included: with Reservoir

Pulley Attachement Type: Press-On

Power Steering Pump Outlet Thread Size: M16 x 1.5

Reference Part Number: 20-69989, 88964571, 15267585, 88964358, 88964571

22

Vehicle Information

For Chevrolet:

  • Impala 2006-2011 V6 3.5L Sedan
  • Impala 2006-2010 V6 3.5L Sedan
  • Impala 2008-2011 V6 3.9L Sedan
  • Impala 2006-2007 V6 3.9L Sedan
  • Monte Carlo 2006-2007 V6 3.5L Coupe
  • Monte Carlo 2006-2007 V6 3.5L Coupe
  • Monte Carlo 2006 V6 3.9L Coupe

  • Please confirm the vehicles model, year as well as the engine size when you purchase!
22

General Instruction on How to Replace the Power Steering Pump!

11

22

33

44

Clear Power Steering Pump Area

Disconnect the negative battery cable, and remove the intake hose, fan shroud, the cooling fan as well as any vehicle shielding.

Remove Power Steering Pump Pulley and the Pump

Use the special power steering pulley removal tool to remove the pully.

Drain the power steering fluid and remove the pump.

Install the New Pump and Reassembly

Place the new pump into position and install the mounting bracket bolts.

Reassemble the radiator fan, fan shroud, air intake and the lower shield.

Refill the Reservoir and Test

Flush and refill the reservoir with manufacturers recommended fluids.

Start the engine and turn the steering wheel about a quarter turn in either direction to make sure the pump is operating correctly.

Product information