Feature

●INSTANTANEOUS AND CUMULATIVE: The mini digital stainless steel flow meter displays show both instantaneous and cumulative flow.
●SCOPE OF APPLICATION: The mini digital flow meter has modular design, making it suitable for use with output modules, sensors and remote transmitters.
●READING AND ACCURACY: There has intuitive clear reading and high reliability on digital stainless steel turbine flow meter, measuring accuracy is ±1%.
●SIMPLE INSTALLATION: The mini digital stainless steel turbine gas oil fuel flow meters are light weight, compact structure and easy to install.
●WIDE COMPATIBILITY: This mini digital stainless steel turbine gas oil fuel flowmeters kerosene flow meter can be widely used to measure , , kerosene, gasoline, etc.


Description

specification:
Thread size: 1inch NPT female
Material: Stainless steel
Color: Blue
Repetition: ±0.5%
Measure accuracy: ±1%
Maximum working pressure: 20BAR
Flow range: 15-120L / Min
Single count: 0.00-9999.9
Total cumulative count: 0-99999
Error coefficient: 0.1000-9.9999
Working temperature: -10°C ~ +60°C(14°F~140°F)
Operating voltage: 2.3-3.3V
Standby time: 1 year
Application: , , kerosene, gasoline
Battery type: 2 x AAA LRO3 batteries
Weight: 841g / 29.7oz (approx.)

Package list:
1 * Turbine Flow meter

Malfunction and solution:
The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely. 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly. 6. Too close to the motor or electronic noise environment Install properly. The reading numbers faded or blanked out.