Feature(may vary by option.)

●The module Operating voltage: 5V. Output type: Output switch. Control capacity: maximum 10A. Detection frequency: 1MHZ. Load capacity: 10A / AC 250V or DC up to 30V.
●Indicator light: LED; RED LED ON: Indicate the Power ON; BLUE LED ON: Relay is working. Installation: Screw fixation, Module output terminal has three ports.
●Protective function: on-board optocoupler isolation drive relay, effective protection of the chip, with anti-reverse function.
●Application: Great for light detection, brightness detection and control , through the potentiometer can be adjusted to detect brightness threshold
●Package included: 5* 5V Photoresistor Sensor Module.

[5V]




[12V]





Description

XH-M131 Photoresistor Relay ModuleXH-M131 Photoresistor Relay Module

Product Description

  1. Connect the input terminal to 5v DC power (note that the positive and negative poles are not reversed), then the power indicator red light will be on.
  2. Connect the output control terminal to a power supply with a maximum voltage of 250V and a maximum current of 10A, and connect it to the load.
  3. When the light detection head detects that the light is dimmed, the switch automatically closes, the load works, and the work indicator lights up in blue; when the light is dimmed, the relay is disconnected, the load stops working, and the work indicator turns off.
  4. If you feel that the light detection is not sensitive enough, you can use a screwdriver to adjust the potentiometer to achieve the detection sensitivity.

Product Parameter

Input voltage: DC12v/5V (There are two voltages, please confirm before purchasing.)
Output type: output switch
Control capacity: Max 10A
Detection frequency: 1MHz
Load capacity: AC 0V--250V/10A, DC 0V--30V/10A
Indicator light: LED
RED LED ON: Indicate the Power ON
BLUE LED ON: Relay is working
Installation: Screw fixation
Characteristic: Relay outputing separately
5V Photoresistor Sensor Module5V Photoresistor Sensor Module

Application

Great for light detection, brightness detection and control , through the potentiometer can be adjusted to detect brightness threshold

Light detection and brightness detection, detection can be adjusted via potentiometer brightness valve point comes relays.