Feature

●Reinstall Reset Dual Clutch: this tool could resprings/re-trips the springs on the clutch so that you can Disassembly lock and installing an unlock.
●Removal Install Dual Clutch: Special designed to disassembly and install dry transmission. Disassemble the double clutch fixing snap ring, install and remove the three claws, turn the threaded bar 20 turns after it makes contact with the input shaft and pull out the double clutch.
●Applicable: compatible with ford dual clutch transmission DPS6. vehicle include: Fiesta 2011-2019; Focus 2012-2018; Transit Connect 2019; B-MAX since 2012.
●12 Months Warranty: we offer 12 months warranty, we will refund or replace if the product have any quality problem.


Description

Special designed to removal install and reinstall reset DPS6 dry dual clutch transmission. Applicable: compatible with Ford DPS6. vehicle include:compatible with Fiesta 2011-2019; Focus 2012-2018; Transit Connect 2019; B-MAX since 2012 ect. FM number: 307675. Instructions for installing an unlock lock Step 1: Insert the locked double clutch, put it into the mounting sleeve, install the extension feet on three sides to fix the proper holes, and fix the extension feet. Unscrew the screw and observe whether it is in place. When in place, remove the tool and install the retaining ring. Step 2: Remove the motor on both sides, use the hexagonal tool to insert the motor teeth, and rotate it counterclockwise to the end (there is a popping sound when rotating, and the double clutch slightly pops up). Turn the other side counterclockwise again. Finally install the motor. At this point, the dual clutch has been unlocked and can be loaded.