Feature
●【Multiple users, Multiple Access Ways】Come with 5PCS ID key fobs, Support 2000 user capacity, support open the door for ID key cards, password, ID key card+password options.
●【Heavy-Duty Zinc Alloy Case】The access control keypad with strong zinc alloy wlectroplated anti-vandal and weatherproof. Epoxy to completely encapsulated, suitable for mounting either indoor or outdoor.
●【Simple Set-ups and Easy Installation】The access control is multifunction standalone access controller, full programming from the keypad, dont need to connect to computer. Working with DC12V power supply.
●【Bright Backlight Keypad】Access control keypad with blue backlight features keys, you cansee the keypad numbers at night or in the dark outside the office. In addition, provided with a WG26 interface and door bell button.
●【High Security and Widely Used】Access control system able to deterring unauthorized personnel, built in buzzer and light dependent resistor (LDR) for anti tamper. Suitable for apartment, office, access control, garage door/sliding door openers, off-limit area, hotel locks, school campus access, identification, parking lot entry, etc.
Description
Completely weather resistant and waterproof, and able to work in almost any condition, this advanced access control system is easy to install, programmable, Protect personal property, businesses, or off-limit areas.
Important Notice:
Compatible EM standard card (Cant support some encrypted cards,such as HID, Cobra, APCiK, etc)
Important Notice:
- Its a wired keypad, for garage door/sliding door openers, please make sure your garage door/sliding door openers is compatible with the keypad.
- If your garage door/sliding door openers has a wired wall push button wiring port, supports run by wired wall push button, then its compatible with the keypad.
- The wired keypad can be used with most third party garage door/gate openers or swing/sliding door openers, whose control board accepts “normally open dry contact” signal, powered by the openers control board or powered by an external DC 12V-24V power supply control.
Specifications:
- Input Voltage :DC 12V
- Frequency: 125khz
- User Capacity : 2000
- Card Reading Distance : 1 ~ 6 cm
- Operation Temperature: -45℃~60℃ / -49℉~140℉
- Input Current : Standby : < 30mA (not including attached devices)
Package includes:
- 1 x Metal Access Control
- 5 x 125kHz RFID Keyfobs
- 1 x Installation Fixed Label
- 1 x Installation Kit
- 1 x User Manual
Features:
- Strong Zinc Alloy Electroplated anti-vandal case, IP68 Waterproof, high security.
- 125kHz RFID Proximity ID Token Tag Key keyfobs for Access Control.
- Support 2000 standard users, Supports ID Card, Password, ID Card + Password, Can add user and delete user as your requirement.
- Full programming from the keypad, Built-in proximity card reader, Built-in keypad for PIN code entry, Backlight keys.
- With lock relay output, Lock output current short circuit protection, Very low power consumption.
- Secure / normal Mode, NO / NC output, Build-in buzzer, Built-in light dependent resistor (LDR) for anti tamper.
- Red, Yellow and Green LEDs display the working status.
RFID Keyfobs:
- Works as a regular 125KHz RFID
- Card type: Standard EM card
- Chip: Tk4100
- Compatible with standard EM ID access devices or ID reader
- Contactless transmission of data and supply energy
- Card material: PVC
- Detection distance: 2-10mm
- Read only, not HID card, can not be programmed, not rewritable
- Each card pre-programmed with a unique ID number, first 10 digitals are printed on the card
- Compatible with other universal 125kHz tags like EM4100/4102, Suitable for 125kHz RFID proximity access control system and ID management system
|
|
|
|
|---|---|---|
Backlight Keypad FeatureAccess control keypad with blue backlight features keys, you can see the keypad numbers at night or in the dark outside the home. Light indication for different modes; Red light stands for Enter into programming mode;Yellow light for in the programming mode;Green light for Operation successful mode. |
Outdoor Waterproof DesignThe access control keypad with strong zinc alloy, impact resistance and wear resistance, anti-vandal and weatherproof. Epoxy to completely encapsulated, Back potting treatment, effective against water ingress, heat, corrosion. Suitable for mounting either indoor or outdoor. |
Tamper Alarm FunctionBuilt in buzzer and light dependent resistor (LDR) for anti tamper. Alloy Electroplated anti-vandal case, Anti explosion and pry, which is durable to use. Buzzer alarm when disassembling the access control keypad. |
|
|
|
|
|---|---|---|
Large Capacity
|
3 Ways Access
|
Easy to use
|
IMPORTANT NOTE:
Its a wired keypad, for garage door/sliding door openers, please make sure your garage door/sliding door openers is compatible with the keypad.
If your garage door/sliding door openers has a wired wall push button wiring port, supports run by wired wall push button, then its compatible with the keypad.
Installation:
- Remove the back cover from the keypad using the supplied special screw driver
- Drill 2 holes on the wall for the Self tapping screws and 1 hole for the cable
- Put the supplied rubber bungs into the 2 holes
- Fix the back cover firmly on the wall with 2 Self tapping screws
- Thread the cable through the cable hole
- Attach the keypad to the back cover
Please note that "exit button", "electric lock", "DC 12V power supply", "Remote control"are not included in this package, please kindly refer to our store for all available accessories for Access Control.