Specifications: - Outside diameter: 4 3/4"
- Total width: 3"
- Clutch back to sprocket: 2 1/2"
Fits: - 2-6.5hp Honda & Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200
- Briggs & Stratton Tecumseh Engines 2 - 6.5 HP With 3/4" Shaft
- Other engines with 3/4 crank shaft and 3/16" key way
- includes 1x 3/4" Bore 12 Tooth Clutch,2 clutch bolts, 2x washer kits , 2x wrenches and 2x screws (Chain Not included)
|
NOTE: 1. Driving too slowly: A clutch starts to engage around 2,000 rpm and will lock up around 2,600 rpm. 2. Short stop and go driving: The longer you drive at full throttle the better off it is for the clutch, because it gives it a chance to cool off before the next engagement. 3. Driving with the foot on the brake: This is a problem with new drivers that are unsure of themselves.
|
4. Restrictions: Dont try and reduce a go kart speed by limiting the travel of the gas pedal or by putting a restrictor in the carburetor to limit full rpm. 5. Dont put oil inside the clutch holes: The holes on the drum are to let the hot air out of the clutch. DO NOT SQUIRT OIL IN THESE HOLES. When oil gets in the drum portion of the clutch it will cause excessive slippage, which means undue heat will be generated.
|