Feature(may vary by option.)
●Size - Model: 1018 (Inner Diameter=8mm, Outer Diameter=22mm, Thickness=7mm)
●Material - Rolling Balls are made of chrome steel with good surface quality, good hardness, load capacity, and wear resistance. The cage is made of stamping steel.
●Features - Double row, open type. ABEC1 accuracy, normal clearance.
●Applications - Suitable for applications such as drive shafts where the shaft and housing are difficult to center and where the shaft is prone to deflection.
●Package Content - 2 x Self-Aligning Ball Bearings
[9x26x8mm]
[7x22x7mm]
[8x22x7mm]
[6x19x6mm]
Description
Self-Aligning Ball Bearings
- This self-aligning ball bearing is a non-separable open bearing.
- Two Rows of Balls: Self-aligning ball bearings have two rows of balls, which enable them to support higher radial loads compared to single-row ball bearings.
- Spherical Outer Ring: The outer ring of a self-aligning ball bearing has a spherical shape, allowing it to align with minor shaft misalignments. This design helps distribute load evenly across the bearing surfaces.
- Two Raceways: Self-aligning ball bearings have two raceways on the inner ring, enabling them to accommodate both radial and axial loads.
- Mainly bear radial load, but also can bear a small axial load, generally do not bear pure axial load. Applicable to the support seat hole can not keep the coaxiality of the components, but the relative tilt of the inner and outer ring of the self-aligning ball bearing can not exceed 3 degrees.
- Rolling bearings are used in a wide range of applications, from agricultural machinery to conveyors, robots, elevators, rolling mills and ship rudder shafts.
Features
- Self-Aligning Capability: The unique design of self-aligning ball bearings allows them to automatically adjust and correct alignment issues caused by shaft deflection, mounting errors, or other misalignments.
- Low Friction: These bearings have low friction due to their spherical design, resulting in reduced heat generation and improved operating efficiency.
- Easy Installation and Maintenance: Self-aligning ball bearings are relatively easy to install and maintain. They typically require less frequent re-greasing.