Feature

●🌟【AUTOMATIC TEMPERATURE COMPENSATION】- The pH meter has built-in automatic temperature compensation function, so it no longer needs to take care of the temperature of the test liquid, so it can accurately measure the pH value of the sample.
●🌟【HIGH ACCURACY】- Our water Tester has a sensitive electrode sensor to read accurate pH levels. The included detailed manual will show you how to get the best accurate and stable reading.
●🌟【AUTO CALIBRATION】- The pH meter has an automatic temperature compensation function, which can be adjusted according to the water temperature and water quality, and the pH reading can be obtained almost immediately. Similarly, you can also use "Calibration Buffer Powder" to calibrate the pH tester with one button.
●🌟【POCKET SIZE】 Water tester is small in size, light in weight, and can be carried in a pocket, and is easy to carry when going out, easily detect water quality anywhere
●🌟【WIDELY USED】 - Digital pH meter for water can be used to test drinking water, swimming pools, pH balance in aquarium and any other liquids. pH meter with green backlit LCD helps to easily record readings, even in low light conditions.


Description

pH plays a pivotal role in making the nutrients in your solution soluble so that they can be accessed by your plants. To help your plants thrive, pH meter gets the fundamentals right by measuring pHto ensure that these are always within the optimal range. Easily observe the living environment of aquatic organisms.

pH plays a pivotal role in making the nutrients in your solution soluble so that they can be accessed by your plants. To help your plants thrive, pH meter gets the fundamentals right by measuring pHto ensure that these are always within the optimal range. Easily observe the living environment of aquatic organisms.

📢📢𝑯𝑶𝑾 𝑻𝑶 𝑴𝑬𝑨𝑺𝑼𝑹𝑬 𝑷𝑯 𝑽𝑨𝑳𝑼𝑬:

1. Remove the protective cap from the handheld pH meter. Rinse the electrode with distilled water and let it dry.
2. Press the ON/OFF button to turn on the unit. Dip the electrode in the target solution, making sure the whole electrode is submerged.
3. Stir the solution gently and wait for the value to stabilize. The LCD screen will display both the temperature and pH.

📢📢𝑪𝑨𝑳𝑰𝑩𝑹𝑨𝑻𝑰𝑶𝑵:

①Turn on the pH meter
②Dissolve each buffer solution in 250 ml of distilled water
③Immerse the electrode into the pH 6.86 solution.(under the temperature of 25℃)
④Press the “CAL”(calibration) button for 5 seconds and release
⑤Display screen will start flashing “6.86”
⑥Wait it until the display screen stops flashing.
⑦Rinse the electrode with distilled water and make it dry with filter paper.
⑧Repeat the above steps with 4.01 pH buffer powder and 9.18 pH buffer powder.

🎁🎁𝑷𝑨𝑪𝑲𝑨𝑮𝑬 𝑰𝑵𝑪𝑳𝑼𝑫𝑬𝑺:

1 x PH Meter
3 x Calibration packets
1 x Carrying case
1 x Users manual