Feature

●🐝 [Zero Leakage]: Each honey bucket valve has 2 "O" rings that behave as gaskets for a good seal, just make sure the nut is tight and you dont need to worry about the pail or gate leaking.
●🐝 [Durable & Safe Material]: Honey tap is made of food grade nylon plastic and stainless steel wing nuts, which is durable, non-toxic and safe.
●🐝 [An Ideal for Beekeeper]: Honey valve can be installed on the honey extractor, honey tank or bottling pail, you can easily control the amount of honey that flows out. Its a necessary honey extraction equipment.
●🐝 [Easy to Install]: First, drill a 1-3/4 inch hole in the bucket, honey bucket valves has a threaded barrel,then inset it into hole in bucket. Tighten nylon nut inside and let it pull the valve against the bucket.
●🐝 [Warranty & Service]: 24 hour online service, 30 days unconditional refund, 365 days warranty for the quality. If you encounter any problems, please feel free to contact us directly.


Description

Kailund Nylon Durable Honey Extractor Valve

A honey gate is a plastic valve at the bottom of the bucket, which is used to drain honey from the bucket. The honey gate allows you to bottle directly from the bucket, among other things.


Features:

➤ The honey tap has a flexible bolt design, easy to operate and no honey leakage.

➤ Honey bucket valves has stainless steel screws, durable and not easy to break.

➤ Food grade nylon plastic, suitable for keeping food, olive oils and honey in particular.

➤ A 1-3/4 inch hole drill bit is the proper size for the hole in the bucket.


Specifications:

Note:

  1. Be sure flat washer is against wing nut and not under valve flap.
  2. Be sure to drill the hole high enough so you can spin the nut on the inside without hitting the bottom of the bucket.
  3. Ideally, using a square food grade bucket would be best.