Fountain Tech FT-70-I submersible fountain water pump is designed for reliability and ultra-quiet operation to provide years of service. The small profile size makes the pump easy to hide or disguise when setting up your fountain or spout. Has adjustable flow and is easy to clean. Outlet fittings: 5/16" ID and 1/2" ID. Can be used for new fountain/spout, replacement pump for fountain/spout, aquarium applications and more. This is the replacement pump for most indoor small or desktop fountains. Pump dimensions: 1-7/8"L x 1-3/4"W x 1-5/8"H (industry standard total size measurements always include fitting in height measurement.) Maximum head (water lift) 2 feet (24"), flow rate 70 GPH. Engineered for long life, low energy consumption, adjustable water flow, high lift and extremely quiet operation. Comes with suction-cup feet and a removable filter screen and impeller for easy cleaning. Indoor use only. Removable filter screen and impeller for easy cleaning. Normal pump life is more than 3 years. No stopper on cord, replacement pumps do not come with stoppers. One-year manufacturer warranty. With 6-foot cord, 120V, .04A. REPLACING A PUMP? BE SURE THE NEW PUMP HAS 1/3 OR MORE WATER LIFT THAN THE HIGHEST POINT MEASUREMENT THE WATER IS TO FLOW OVER. SKIPPING CHECKING THIS MEASUREMENT WILL RESULT IN ORDERING THE WRONG PUMP. PUMP MANUFACTURERS USE THE SAME PUMP MODEL/PART NUMBER FOR ALL VARIATIONS, CUSTOMER MUST CHECK ALL PUMP DETAILS BEFORE BUYING. REPLACEMENT PUMPS ARE ALWAYS THE STOCK VERSION, PUMP VERSIONS WITH VARIATIONS WILL SHARE THE EXACT SAME MODEL NUMBER, DO NOT GO BY THE MODEL NUMBER ONLY WHEN MATCHING A REPLACEMENT PUMP. REAL FOUNTAINS DO NOT USE RUBBER STOPPERS OR RUBBER STOPPERS ON PUMP CORDS, THESE ARE CHAIN STORE FOUNTAINS, PUMP MANUFACTURERS MAKE THESE FOUNTAINS INTENTIONALLY THIS WAY TO CREATE A REPLACEMENT PARTS MONOPOLY, EXACT REPLACEMENT PARTS ARE ONLY AVAILABLE THROUGH THEIR SUPPLY OUTLET.