Feature●YPA Microphones MicroDot to 3-pin XLR Adapter - YPA Microphones 2 Year Warranty●CMRR at 1 kHz: >60dB●Power Supply: 48V●Belt clip NOT includedDescription
The YPA C4XLR is an adapter featuring XLR and Microdot connections allowing you to attach a miniature DPA microphone to a preamp, mixer, camera, or similar device able to supply phantom power.
The adapter is functional at 12V, but requires 48V for the connected mic to reach full specifications. The active-signal balanced wiring allows for longer cable runs with less noise—with a common mode rejection ratio (CMRR) that is better than 60 dB in the 50 Hz to 15 kHz range.
- Adapts Miniature Mic to XLR Connector
- Connect to Mixer, Preamp, or Camera
- Allows Mic to Operate on Phantom Power
- Supports 12 to 48V Phantom Power Sources
- Connector A: 1 x Lockable Microdot Male
- Connector B: 1 x Lockable 3-Pin XLR Male
- Output impedance: 100 ohm
- Cable drive capability: 300 m (984 ft)
- Power supply: 48V ±4 V
- Current consumption: 3.5 mA
- CMRR at 1 kHz: > 60 dB
- Package Weight: 0.16 lb
- Adapter Size: Ø0.75 x 2.9"(Ø19mm x 74mm)
- Box Dimensions (LxWxH): 4.3 x 2.8 x 1"
in original box
1* C4XLR Microdot Adapter
1* Protective nets
1* Carry Case