Feature(may vary by option.)
●POA-LMP LP60 Lamp Fit For ELPLP60 V13H010L60 Epson PowerLite 92 93 93+ 95 96W 905 420 425W BrightLink 425Wi 430Wi EB-93 EB-93e EB-93H EB-95 EB-96W EB-420 EB-421i EB-425 EB-425W EB-905
●POA-LMP LP60 Lamp Also Compatible For ELPLP61 V13H010L61 Epson PowerLite 915W 1835 430 435W D6150 BrightLink 435W BrightLink 436Wi EB-430 EB-431i EB-435W EB-436WT EB-910W EB-915W EB-925 EB-D430 EB-D6150 Projectors.
●P0A-LMP lamps use German luminous tubes and precision coated reflectors, bring you ultra high brightness and definition; And every lamp from POA-LMP has been strictly tested before shipment, and it is easy to install it into your projector.
●We have been specialized in projector lamps solutions for more than 10 years, and we are aimed to provide customers with high brightness, long lamp life, stable light output and accurately matching POA-LMP replacement lamps.
●180 Days warranty and 30 days refund; All messages willl be replied within 12 hours, and we will try our best to back you up.
[Red]
[Gold]
[Blue]
[Black]
[Orange]
Description
POA-LMP Lamps: Ultra High Efficiency Replacement Projector Lamps
POA-LMP has been specialized in projector lamps for more than 10 years, all the lamps are designed accurately matching your original lamps. The POA-LMP lamps use optimized very short arc and high internal pressure lamp wick, with precision coated reflectors, which bring you high brightness, long lamp life and stable replacement lamps. We are aimed to provide customers with ultra high efficiency POA-LMP replacement lamps.
Lamp Parameter and Specification:
Part Number: LP60/LP61
Lamp Type: 200/230W
Easy To Replace the Lamp
POA-LMP lamps are designed accurately matching your original lamps, our lamp instructions will help you replacing it easily.
Warning:
1). Before you replace the lamp, let the projector cool down for at least one hour to let the lamp fully cool before replacing it to avoid injury.
2). Do not touch any glass on the lamp assembly to avoid premature lamp failure.
How To Extended Lamp Life
1). Turn off this product when not in use to prolong the lamp life.
2). Don’t operate the projector non-stop or for too much long time.
3). Do not unplug the power line before the cooling fan stop working, and also do not disconnect the power directly on the working projector.
4). After turning off the projector, wait at least 60 minutes to reboot the projector.
5). ECO mode will help you extend the lamp life.
6). Clean the air filters, fan, and the projector inside every 3 months, otherwise the elevated temperature will cause the projector shut down automatically.
7). Please ensure there are no obstacles around the projector to allow the projector to dissipating heat normally.
Note: Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.