Feature

●10 Head Ultrasonic Mist Maker uses the high-frequency resonance of the disc to throw water away from the water surface to create a natural mist, increase air humidity and refresh the air. Suitable for pond, tank, festival, especially Halloween, Christmas, etc.
●[IMPORTANT PARAMETERS]: 10 Head Pond Fogger with waterproof power supply and float; Voltage:110V; Size: 28*85*52mm; Maximum evaporation: 9000ml/H; Use Ambient Temperature: +5~45℃; Use Environmental Water Depth: 7-9cm. If the water level is deep, please use a float to achieve the best fogging effect.
●[LED LIGHTS]: There are five colors of LEDs: white, red, blue, green, and yellow, which change in sequence. Five colors of LED lights can create a magical atmosphere for your pond/aquarium. It is suitable for holidays such as Halloween and Christmas, and can increase the festive atmosphere.
●[WATERPROOF POWER SUPPLY]: The 10 head Mist Maker Fogger adopts the waterproof power instead of moisture-proof one. The waterproof power supply is suitable for dry/humid environment, and it will not be damaged due to the generation of fog, longer service life. NOTE: Do not put the power supply and mist maker board connection port into water, as it may cause damage.
●[SAFETY]: 10 heads are in a design of independent line, not effecting each other; it stops working when the water is running out.


Description

10 head mist maker fogger with LED10 head mist maker fogger with LED

SIMPLE USE & SAFE USE - Best Efficiency Makes Out of Simple Tips

NOTE: The machine is safe and simple to use, but there are some safety issues associated with using the machine irregularly or excessively. To use the machine more effectively and safely, please try the following tips as much as possible, which are simple but will greatly ensure using safety and increase the life of the machine.
Tip01: Please do not place the Transformer and other Cable Connecting Parts into the water!
Tip02: The Mist Making Board works nicely in about 2.75inch/7cm water depth. When the water is deeper than 3.9inch/10cm, please use a buoy. Please pay attention to the model when choosing a buoy. It is best to use tap water without essential oil.
Tip03: Please use the mist maker no exceed 10 hours at most a day, working overload will badly shorten th service life.
Tip04: The degradation of the ceramic discs will cause water leaking-in, please clean the ceramic discs with cloth regularly (depending on the using frequency) and replace with the new discs in time.
Tip05: When replace the ceramic discs, please make sure the cavity is dry, and tighten the ring to prevent accessories loose resulting in water leaking-in.
Tip06: If you have problems with the products or have any question, please let us know.

What is the ultrasonic frequency?

Mxmoonants entire series of mist maker use 1.7MHz ultrasonic frequency.

Is it possible to control the amount of fog emitted?

The ultrasonic fogger adopts a constant mist output, and the mist output cannot be adjusted in any way.

Can the range of the water mist be controlled?

Under normal circumstances, the humidification range of the pond fogger is small. If you want to extend the humidification range, you can add a fan to blow the mist out of the container.

Can one power supply connect multiple mist maker boards?

No, the power of a single power supply cannot satisfy multiple mist maker boards.


From the brand

Product information