![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
Netbell-2 Bell Timer Controller | Netbell-NTG PA System Controller | Netbell-4K Bell Timer Controller | Netbell-K12 Bell Timer Controller | Netbell-2-1Buz Break Buzzer System | Netbell-2-1Bel Break Bell System | |
Customer Reviews |
4.0 out of 5 stars
20
|
3.4 out of 5 stars
6
|
— |
— |
5.0 out of 5 stars
4
|
3.8 out of 5 stars
21
|
Price | $426.00$426.00 | — | $693.00$693.00 | $564.00$564.00 | — | $701.00$701.00 |
Application | To replace or upgrade most of the old bell timer systems on the market | To generate and schedule custom sounds or pre-recorded messages up to 10 hours to play through any existing PA or school intercom system or paging systems | To replace or upgrade most of the old bell timer systems on the market | To control one 12VDC 1.6A existing or new bell/buzzer directly | Cost-effective break buzzer system for warehouses, factories or other commercial buildings in areas of high ambient noise levels | Cost-effective break bell system for schools, offices, warehouses, factories or other commercial buildings in areas of low to medium ambient noise levels |
Software | Built-in web-based software, program from any web browser with the IP address, no additional software needed | Built-in web-based software, program from any web browser with the IP address, no additional software needed | Built-in web-based software, program from any web browser with the IP address, no additional software needed | Built-in web-based software, program from any web browser with the IP address, no additional software needed | Built-in web-based software, program from any web browser with the IP address, no additional software needed | Built-in web-based software, program from any web browser with the IP address, no additional software needed |
Event Schedulings | Up to 500 programmable event schedules, weekday/calendar based | Up to 500 programmable event schedules, weekday/calendar based | Up to 500 programmable event schedules, weekday/calendar based | Up to 500 programmable event schedules, weekday/calendar based | Up to 500 programmable event schedules, weekday/calendar based | Up to 500 programmable event schedules, weekday/calendar based |
Manual Bell/Buzzer Control for Emergency | Yes (Push switch not included) | Yes (Push switch not included) | Yes (Push switch not included) | Yes (Push switch not included) | Yes (Push switch not included) | Yes (Push switch not included) |
Bell Output(s) (Dry Contact) | 2 (Dry Contact, 1-Form-A 30VDC@8A, 48VAC@8A Max) | 2 (12VDC/5A, 24VAC/DC 3A, Dry contact) | 4 (110V/10A, Dry contact) | 1 (12VDC/1.6A, Wet contact)) | 2 (Dry Contact, 1-Form-A 30VDC@8A, 48VAC@8A Max) | 2 (Dry Contact, 1-Form-A 30VDC@8A, 48VAC@8A Max) |
Enclosure | DIN Rail Mountable | Polycarbonate, White Gray Body/Cover, 125X175X60MM | ABS, IP66/150mm x 150mm x 90mm | ABS, IP66/150mm x 150mm x 90mm | Controller: DIN Rail Mountable; Buzzer has a weather-proof wall-mountable back box | Controller: DIN Rail Mountable; Bell has a weather-proof wall-mountable back box |
Power Input | 12VDC/POE | 12VDC/POE | 12VAC | 12VAC | 12VDC/POE for controller/24VAC for buzzer(Included) | 12VDC/POE for controller/12VDC for bell(Included) |
Accessories | Controller: Power Supply/RJ45 Cable (1M). | 3M RJ45 Cable/3ft RCA Cable/3ft 3.5mm Audio Cable/3ft 4-Conductor Cable | Power Supply/Power Cable/RJ45 Cable(1M), Bell Cable(4, 3M)) | Power Supply/Power Cable/RJ45 Cable(1M), Bell Cable(3M)) | Controller: Power Supply/RJ45 Cable (1M). Buzzer: weather proof back box, 24VAC power supply, 10ft two-conductor wire, wago connectors, Volume Adjustment Kit | Controller: Power Supply/RJ45 Cable (1M). Bell: weather proof back box, 12VDC power supply, 10ft two-conductor wire, wago connectors |
Included Bell/Buzzer | No | No | No | No | 1 (4” Buzzer,102dBa/1m); Coverage: 20-25K sq.ft at a normal ambient noise level. User can add one more buzzer to double the coverage | 1 (6” Bell,86dBa/1m); Coverage: 8-10K sq.ft at a normal ambient noise level. User can add one more buzzer to double the coverage |
Custom Sound Options | No | Yes | No | No | No | No |
The Netbell-2 is housed in a Din-rail mountable enclosure. There are 2 relay outputs (Dry Contact, 1-Form-A relay 48VAC@8A Ma) with removable terminal block connector that provides quick connect/disconnect capability simplifying installation, allowing you to control up to 2 bells/buzzers and other timed signal equipment. Each sound device with a suitable power source can be connected at 500 feet away from the controller with 16AWG cable (250ft/18AWG). You can wire up to 2 push switches to the digital inputs to ring bells manually for emergency. Its a cost-effective solution to replace or upgrade most of the older, traditional bell timers in schools, factories, businesses, warehouses, industrial facilities and commercial buildings.
In needs of building new school & factory break bell system in areas of medium or loud noise level? You can check the Netbell break bell system from our Netbell Store.
If you are looking for a high ambient noise level system that can cover up to 60-75,000 square feet of industrial working area, you can check our Netbell Buzzer Systems.
If you need an all-in-one system for break time alarms with different tones, live announcements, background music, please check our multi-functional Netbell-NTG PA Systems.
To generate and schedule different tones or record your own messages up to 10 hours to play through any existing PA or school intercom system or paging system, please check our Netbell-NTG PA System Controller.
The Netbell-2 web-based bell controller is built on a TCP/IP platform with a built-in web server and special software designed for scheduling a bell system. With the built-in web interface, you can access, control and schedule bells over a network or the Internet, no additional software or designated computer required. With the special designed easy-to-use BellScheduler desk app, manage & schedule multiple Netbell devices from multiple locations in a few clicks, making the management of your bell systems incredibly easy. With the digital inputs you can wire a push switch(not included) for ringing bells manually.
The Netbell bell controller can be used with any PA systems to schedule and activate the tones for break time alerts. It’s compatible with Bogen paging and intercom systems, Valcom PA system and other school/factory public address system in the market as long, as there is a tone generator built into the system and the system has contact closure tone activation function. The relays on the Netbell controller can be setup to activate different tones on a tone generator depending on how many relays the controller has. For example, a Netbell-2 can be used to activate two tones, Netbell-8 for 8 tones, etc. Wiring each one of the relays to a different tone activation terminal, the relays act as simple closure switches.
Network enabled, all-in-one automatic bell system controller, all software and mounting hardware required for installation and operation are included, no extra software or designated computer required. Add schedules using any computer on your network, without having to go through the firewall
Once you connect the Netbell to your network, it will get an IP address from your router automatically, put that IP address on your browser to access the scheduling software, add up to 500 programmable event schedules from your web browser remotely, eliminating the need for wiring and central control station
Connect the Netbell to your network and AC outlet with the provided cables, and you are ready to go. Each Netbell device is a web SERVER, it’s an independent system which includes its own hardware and software, you can add more units as your business grows, without significant infrastructure changes
Its ready to go out of the box, and you need only connect the unit to your AC power outlet and to the existing network with the provided power transformer and cable. It can be connected anywhere on the network and does not require direct connection to a PC. For those who wish to forego networking the Netbell, it is also able to function as a stand-alone device. Connect the unit to your PC, add schedules, then disconnect, and it will function as scheduled.