Feature(may vary by option.)

●Ip54 protection; Higher quality and lower price; inch/metric/fractions conversion; Home DIY and professional use are highly recommended
●Fine polished stainless steel (will stick with magnet) and NEW processing of depthometers groove give better looking, smooth sliding, and accurate result
●Measure Range: 0-6 inches/150mm; Display: 3/4"x 2" (20mmx 50mm) extra large LCD; Accuracy: ±0.001"/0.03mm; Resolution: 0.0005"/0.01mm; 1/128"
●Featured RS232 Data transfer port. Port for data transfer only, not for charging. Must connect with "DTCR-02" Cable (NOT INCLUDED) to make data transfer to PC. CANNOT CONNECT WITH REGULAR USB CABLE.
●Each digital caliper has been fully calibrated before ready to sell; Patent in the US; Comes with one extra battery

[12inch]




[8inch]




[6inch]





Description

  • Clockwise Tools DCLR IP54 Digital Caliper is a higher quality digital caliper. It is highly recomended for home DIY using as well as professional using.
  • Please NOTE that IN ORDER TO OBTAIN A MORE ACCURATE MEASURING RESULT, PLEASE USE A SMALL PIECE OF PAPER OR PAPER CARD TO CLEAN THE EXTERNAL JAWS EVERY TIME BEFORE USING!
  • Clockwise Tools DCLR DIGITAL CALIPER HAS AUTO-OFF FUNCTION AND IT TAKES 5-7 MINS TO SHUT OFF.
  • Measuring Range available in 0-6 inch/150mm; 0-8 inch/200mm; 0-12 inch/300mm
  • Extra large LCD screen 3/4"x 2" (20mmx 50mm) in Inch/Metric/Fractions conversion.
  • Up to 1/128" fractional display.
  • Accuracy: ±0.001"/0.03mm (6 inch); ±0.001"/0.03mm (8 inch); ±0.0015"/0.04mm (12 inch)
  • Resolution: 0.0005"/0.01mm, 1/128"
  • Repeatability: 0.0005"/0.01mm
  • Fraction/mm/inch Convertible
  • IP54 protection; Featured RS232 Data transfer port. Port is for data transfer only, not for charging. Must connect with our DTCR-02 Data cable. CANNOT Connect with regular USB Cable
  • Digital caliper has been calibrated
  • Design patented in the US
  • Clockwise Tools DCLR-0605 Digital Caliper
  • Grey box
  • One installed 3V, CR2032 battery; One spare battery
  • User guide

Important TIPS

  • For all Digital Calipers, The Scale printed on the body/beam is for decoration ONLY. We DO NOT suggest to read any measuring results from this print scale. The number should be read from the digital display ONLY. When we install the digital caliper, the ZERO line of the print scale SHOULD NOT lines up with the JAW line. It should line up/under the left side of the black plastic vernier cover.
  • This digital caliper thumb wheel is designed to be loose so that it will hang on the plastic hook when not in use. This will eliminate the friction between the body/beam and the wheel and give better movement. When doing the adjustment, it requires thumb to push/press the wheel toward the beam first, then move back and forth to adjust.

Clockwise Tools DCLR IP54 Digital Caliper

Patented in the US Available in 6", 8", and 12 Fractional up to 1/128" IP54 Water & Dust Resistance RS232 Data Output

Why Clockwise Tools

30 years of manufacturing digital caliper. We know what you need


Differ from other digital calipers

Fine polished stainless steel; Smooth cut in depth groove

  • Better looking
  • Smoother sliding
  • More precision

We calibrate each digital caliper before sell
  • External measure Calibration
  • Internal measure Calibration
  • Depth measure Calibration
  • Step measure Calibration

RS232 Data Transfer

RS232 Data Output

Clockwise Tools DCLR Digital Caliper featured RS232 Data Transfer Function

DTCR-02

  • Clockwise Tools DTCR-02 RS232 Data transfer cable is avaliable on amazon.
  • Please note that DCLR Digital Caliper CAN ONLY BE CONNECTED WITH DTCR-02 Cable

Data Transfering

Once connected you can transfer measuring result to PC

4 Ways Measuring

External Measuring

Measuring outer diameter or length

Internal Measuring

Measuring inner diameter

Step Measuring

For objective height or length that are hard to measure by using external jaws

Depth Measuring

Meauring small objective depth which is hard to reach by regular measuring tool

Clockwise Tools DCLR IP54 DIGITAL CALIPER SERIES

DCLR-0605

  • Measuring Range: 0-6"/150mm
  • Accuracy: ±0.001"/0.03mm
  • Battery: 3V, CR2032 (installed); Extra Battery Included
  • 100% satisfied guarant ed

DCLR-0805

  • Measuring Range: 0-8"/200mm
  • Accuracy: ±0.001"/0.03mm
  • Battery: 3V, CR2032 (installed); Extra Battery Included
  • 100% satisfied guarant ed

DCLR-1205

  • Measuring Range: 0-12"/300mm
  • Accuracy: ±0.0015"/0.04mm
  • Battery: 3V, CR2032 (installed); Extra Battery Included
  • 100% satisfied guarant ed

Whats in the box

  • Batteries, Digital Caliper, User Guide