Parts List
- Threaded Anchor
- Attachment Bolts (Customers supply for wood or concrete)
- Standoff (30 or 40mm) with female thread to connect to threaded anchor
- Back Rubber Gasket
- Front Rubber Gasket
- Machine Cap with M10 Bolt
Overview
These instructions will provide step-by-step installation guidelines for installing the Glass Adapter. The Glass adapter comes with 2 round rubber gaskets, a standoff column (30/40 mm), and the mounting sleeve (you will need to purchase the connection screw separately). Glass Adapters should be installed at a maximum distance of every 4 feet.
Caution: Wear protective ANSI approved safety glasses, working gloves, and mask at all times
Tools Required
- Drilling Tool For Substrate
- 1/4” Drill Bit
- The Holes Require On Glass Are 1” In Diameter.
Instructions
- When Using A 3/8” Lag Screw, Spot Drill Using 1/4” Drill Bit, Different Mounting Surfaces Require Different Methods.
- Begin With Only The Mounting Sleeve With The Appropriate Screw
- Twist The Standoff Column (#3) Onto The Sleeve.
- Insert The Gasket #4, Place The Glass In Place, Then Gasket #5, And Then Place Cap #6 And Screw In Over The Glass. The Hole Size On The Glass Is 1” In Diameter.