Feature(may vary by option.)
●💎【Fit 3/4" Shaft Horizontal Pumps】Fit Most 3/4" Shaft Horizontal Crank Pressure Washer Engines, brands including for Honda GCV , for Briggs
●💎【Pressure Washer Pump】Direct drive horizontal axial pump fits most horizontal 3/4" shaft power washer: Could work at wide range from 2900 to 3200 PSI, best performance at 3000PSI and 2.4GPM. Good replacment for horizontal pressure washer pumps.
●💎【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine.
●💎【Easy to Install】When installing, please ensure that the keyway is installed before running your pressure washer.
●💎【Sale and After-Sale Service】If you received any wrong item, please feel free to contact us for return and exchange. The provides a convenient connection to most 3/4” diameter shaft, if you are not sure your high-pressure washer could fit or not, please inform us your engine model, install size, we would like to service you and help you.
[Silver]
[Black]
Description
Pump Specifications:
Pump Type: Axial Cam
Head Material:Aluminum
Max Pressure:3200psi
Rated Flow:9L/Min(2.4GPM)
Engine HP Choice: 6.5 HP
Max. Water Supply Temperature: 104°F
Basic Feature:Low Pressure Deterent injection,Thermal Relief Valve,Pre-Oiled Ready to go!
SurmountWay Pressure Washer Pump
Pressure water pumps are the most important part of a pressure washer. They power through to deliver water at high speeds.
SurmountWay provides an efficient Horizontal Axial Pressure Washer Pump Kit, minimizes engine load.
- Direct drive Horizontal Axial power washer Pump designed to fit most brands & models up to 3200 PSI.
- 3/4" shaft & SAE gas engine flange produces up to 2.4 GPM, suitable for homeowner units.
- Engines Brand: Fits Honda(only 3/4" shaft), Briggs & Stratton, Craftsman, Karcher, Blackmax, Ryobi, Troy Bilt, Craftsman, Simpson, Troybilt,Powerstroke.
- OEM troy build pump,EXCLUSIVELY FOR HORIZONTAL ENGINES WITH A 3/4" SHAFT
|
|
|
|
|---|---|---|
Choose the Right Replacement PumpThis pump is Exclusively for Horizontal engines with a 3/4" shaft(Does Not Fit engine with 7/8" shaft ) |
Mount the New Pressure Washer PumpInstall the shaft key into the keyway and push the pump completely onto the engine. Then Install all four bolts and tighten evenly. |
Powerful PerformanceThe powerful pressure washer pump generates impressive 3200 PSI with a 2.4 GPM flow rate for tackling tough dirt and debris, can get the job done quickly! |
If low pressure symptoms,Just do as follows:
Possible Cause(s)
1.Worn nozzle
Correstive Action:Replace with nozzle of proper size
2.Belt slippage
Correstive Action:Tighten or replace with correct belt
3.Air leak in inlet plumbing
Correstive Action:Disassemble, reseal and reas-semble
4.Relief valve stuck, partially plugged or improperly
Correstive Action:Clean and adjust relief valve;check for worn or dirty valve seats
adjusted valve seat worn Worn
5. Worn packing. Abrasive in pumped in cavitation. Inadequate water
Correstive Action:Install proper filter suction at inlet manifold must be limited to lifting less than 20 feet of water or 8.5 psi
6.Worn inlet, discharge valve blocked or dirty
Correstive Action:Replace inlet and discharge valve
|
|
|
|
|
|
|---|---|---|---|---|---|
| Vertical Pump 3200PSI | Horizontal Pump 3200PSI | Vertical Pump 3000PSI | Horizontal Pump 3000PSI | Brass Pump 3400PSI | |
|
|
|
||||
| Customer Reviews | 431
| 429
| 89
| 67
| 199
|
| Price | $72.99 | $72.99 | — | — | $94.99 |
| Brand | SurmountWay | SurmountWay | SurmountWay | SurmountWay | SurmountWay |
| Fot for | Vertical 7/8" Shaft | Horizontal 3/4" Shaft | Vertical 7/8" Shaft | Horizontal 3/4" Shaft | Brass Horizontal 3/4" Shaft |