[Black-Collar-NEW]
[Black-Collar]
[r.blue]
⭐ Mode Setting:
Power ON the device by press and hold the Power button for 1 second.
Green LED or Red LED will light up after device is powered ON.
Press the Mode Button (M) to select the Mode.
LED Breathing Light: Press and hold the Mode Button (M) for 3 seconds to Turn ON or OFF the LED Breathing Light. Flashing Green& Red LED lights alternately make it safer for dogs to travel at night.
👏How It Works:
Green LED: Beep + Vibration Mode
The Bark Control Collar will beep then vibrate every time its triggered.
RED LED: Beep+ Vibration+ Shock Mode
6 Smart operation steps as described on the below. Constant barking within 30 seconds after the previous operation step will trigger the next operation step. Will go back to Step 1 if the device is not activated within 30 seconds.
Protection Mode: 1 Minutes
⚡Step 1: 3 Sec Beep + 5 Sec Vibration
⚡Step 2: 3 Sec Beep + 5 Sec Vibration + 1 Sec Shock Mode (Weak)
⚡Step 3: 3 Sec Beep + 5 Sec Vibration
⚡Step 4: 3 Sec Beep + 5 Sec Vibration + 1 Sec Shock Mode (Normal)
⚡Step 5: 3 Sec Beep + 3 Sec Vibration + 1 Sec Shock Mode (Increase)
⚡Step 6: 3 Sec Beep + 3 Sec Vibration + 1 Sec Shock Mode (Strong)
👌Sensitivity Level
Sensitivity level. Level 5 is the most sensitive, level 1 is the least. One press on the Power button a time to change the sensitivity levels.
👌Protection Mode
On Protection Mode. Protection mode lasts 2 minutes, during which it cannot be triggered in order to prevent over shock to your pet. Protection Mode will be cancelled and the digit turn to set level after 2 minutes automatically or after you press the Power Button.
🔋 Battery Status:
3 bars solid: Full battery or charged & fully charged
2 bars solid: 2/3 battery left
1 bar solid: 1/3 battery left
1 red solid: Lower battery level, please charge it immediately
👇 Important Safety Information
●This product is NOT intended for use on dogs under 6 months old and less than 8 pounds.
●NOT for use with aggressive dogs. Use the product under supervision.
●Avoid leaving the product on dog for more than 12 hours per day. Never connect a leash to the collar.
●Check the contact area daily for signs of rash or a sore. If a rash or sore is found, STOP using the product immediately until the skin heals.
●Wash the dogs neck area and the Conductive Probe Covers and Probes weekly with a damp cloth.
●The environment noise, temperament and breed or size of your dogs may affect the bark control effect. Please refer to Suggestion for The Appropriate Sensitivity Level for more information.
●To better protect your pets skin, please wear the Conductive Probe Covers before use.
Notes: The Conductive Probe Covers can deliver static shock.
Packaging Includes:
Bark Collar * 1
Test Bulb * 1
USB Cable * 1
Strap * 1
Silicone Covers * 4
Steel Probe * 4
User Manual * 1