Motion Sensor Function 1.The light bar headlamp contains motion sensor, just click the motion sensor button to adjust the ON/OFF button function of the lamp. 2.Please press the induction switch in any working mode (except strobe mode). After that, you can easily control the light on and off by waving your hand. (The induction area is located around the induction switch) 3.The length of the headlamp strap can be adjusted at will. Multi Scene Use - Running, walking, cycling, mountaineering, camping, car repairing, etc
|
Modes & Usage 1. Turn on the headlight power switch button for the first time, the COB High mode is turned on, and it can work for 2.5 hours. 2. Press the power switch button for the second time, COB Low mode starts to run, and it can work for 5 hours. 3. Press the power switch button for the third time, it will switch to XPE High mode, which can work for 4 hours. 4. Press the power switch button for the fourth time, XPE Low mode starts to run, and it can work for 8 hours. 5. Press the power switch button for the fifth time, all lights are turned off. 6. In any other mode, press and hold the power button for 2 seconds to switch to Strobe mode. At this time, the COB and XPE lights flash at the same time, and they can work for 8 hours.
|
Thin, Ergonomic Design The COB strip headlamp is made of soft silicone material and can be folded at will without affecting the use, the headlamp is light and compact, only 0.16 pounds, which can be put in the pocket.
|