Installation Steps
- Prepare the mirror, screws, nuts and hex wrench.
- Mount the base on the handlebar in the right place.
- Mount the screws and nuts in turn with the wrench on the base (the long shaft of the screw faces down, it does not need to be tightened completely).
- Mount the mirror on top of the handlebar and tighten the screws and mirror with a small wrench.
- Loosen the black nut and turn the mirror to bring it into the correct position.
- Tighten the black nut with a large wrench to complete the installation.
NOTE:
The bicycle mirror fits only for handlebars with a circumference of 20-24mm/0.79-0.95inch, you should measure the diameter of your handlebar before buying to ensure that the bicycle mirror fits your car.