Feature
●【Product Introduction】DM556S is a digital stepper motor driver, using the latest 32-bit DSP digital processing technology, the driver control algorithm using advanced variable current technology and advanced frequency conversion technology, the driver heat is small, the motor vibration is small, smooth operation.
●【Built-in High Segmentation】The user can set ANY SUBDIVISION within 200~51200 and any current value within the rated current, which can meet the application needs of most occasions. Due to the use of built-in micro-fine technology, even under the condition of low segmentation, it can also achieve the effect of high segmentation, low, medium and high speed operation is very stable, the noise is very small.
●【Automatic Parameter Upper Power Matching Motor Function】The parameter upper power automatic setting function is integrated inside the driver, which can automatically generate the optimal operating parameters for different motors and maximize the performance of the motor.
●【Application Field】Suitable for a variety of small and medium-sized automation equipment and instruments, such as: engraving machine, marking machine, cutting machine, engraving machine, plotter, numerical control machine tool, automatic assembly equipment, etc. In the user expects small noise, high speed equipment in the application effect is particularly good.
●【Features】Variable current control greatly reduces the heating of the motor; The static current is automatically halved; Photoelectric isolation differential signal input; Photoelectric isolation, alarm output; Pulse response frequency up to 500 KHz (default 200 KHz); Protection functions such as overvoltage, undervoltage and overcurrent; Rising / falling edge, IO control spontaneous pulse, single / double pulse, high corresponding / high speed and low vibration, and self-test function.
Description
Installation method
- The reliable operating temperature of the driver is usually within 60℃，and the motor operating temperature is within 80℃.
- It is recommended to use the automatic semi-flow mode when using the motor. When the motor stops, the current is automatically reduced by half to reduce the heat of the motor and the drive.
- Install the drive with vertical side mounting so that the heat dissipating teeth form a strong air convection.
- Install a fan near the drive when necessary to force heat dissipation to ensure that the drive works within a reliable operating temperature range.
Product Introduction
It adopts the latest 32-bit DSP digital processing technology. The driver control algorithm adopts advanced variable current technology and advanced frequency conversion technology. The driver generates less heat and the motor vibrates less, smooth operation. USERS can set 200 ~ 51200 within the arbitrary subdivision and rated current within the arbitrary current value, to meet the needs of most applications.
Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise. The auto-tuning function is integrated in the driver, which can automatically generate the optimal operating parameters for different motors and maximize the performance of the motors.
Power supply and motor power interface
The power supply voltage can work normally between the specified ranges. The driver is preferably powered by an unregulated DC power supply, or a transformer buck + bridge rectifier+ capacitor filter. Note, however, that the peak voltage ripple after rectification should not exceed its specified maximum voltage. It is recommended that the user supply power with a DC voltage lower than the maximum voltage to prevent the grid from fluctuating beyond the operating range of the driver voltage.
If using a regulated switching power supply, be aware that the output current range of the switching power supply must be set to maximum.
Please note:
When wiring, pay attention to the positive and negative poles of the power supply, do not reverse connection.
It is better to use an unstable power supply.
The output capacity of the power supply current should be greater than 60% of the set current of the driver when an unstable power supply is used.
When a regulated switching power supply is adopted, the output current of the power supply shall be greater than or equal to the working current of the driver.
To reduce costs, two or three drives can share a power supply, but the power supply should be large enough.
Characteristics
|
|
|
|
|---|---|---|
|
|
|
|
Application areas
Suitable for all kinds of small and medium-sized automation equipment and instruments, such as: marking machine, cutting machine, engraving machine, plotter, CNC machine tool, automatic assembly equipment, etc. It is especially effective in applications where users expect small noise and high speed.
Control Signal Interface Circuit
|
|
|
|
|---|---|---|
Common anode connection |
Common cathode connection |
Differential control signal interface |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| DMA860S Stepper Motor Driver | 4-Axis Stepper Motor Driver | MACH3 Stepper Motor Driver with Ethernet Network | Automatic Lubricating Oil Pump | MACH3 CNC Control Card | 3D Printer CNC Controller Kit | |
| Customer Reviews | 2
|
— |
— |
— | 18
| 12
|
| Price | $30.98 | $95.00 | $138.07 | $62.78 | $25.00 | $62.00 |
| Axis | 4 Axis | 4 Axis | 4 Axis | ✓ | 4 Axis | 4 Axis |
| Software | ✓ | ✓ | With Mach3 | ✓ | With Mach3 | ✓ |
| Fuction | ✓ | ✓ | with Ethernet Network Interface Card | ✓ | ✓ | ✓ |