Feature

●PACKAGE - 50 pieces x Epoxy Resin Mixing Nozzle Tip, 1.3ml white.
●DESIGN - The interior consists of a spiral arrangement that divides the glue into 2 parts.
●MATERIAL - Made from PE thermoplastic resin material, odorless, non-toxic, insoluble in common solvents at room temperature, low water absorption, good electrical insulation.
●APPLICATION - It is suitable for the mixing of two liquid materials with large proportions and large differences in viscosity; Also, liquids can also be mixed well, such as ethane, rubber, foam, etc.
●DIFFERENCE NOTICE - Please allow 1-3mm measurement difference due to manual measurement and a certain degree of color difference caused by camera lenses, different phone screens, and different monitors.


Description

Features:
①Epoxy Mixing Nozzle is compatible with most standard Type-A or Type-S 50ml Dual-Barrel epoxy and adhesive cartridges.
②Made of PE material in clear shell, the spiral interior static of mixing nozzle mixes two-part components to the ideal ratio.
③Resin Mixing Tip offers unique adhesive solutions for bonding a range of substrates including metals, thermoplastics, and thermoset composites.
④Combining convenience and performance, the Mixing Nozzles mix two-part adhesives, sealers and foams to the perfect ratio every time.
⑤Mixing Nozzle Tip is widely used as epoxy adhesive gun applicator and allow you to apply mixed epoxy directly where you need it from the syringe.
⑥Widely used in the mixing of various two-component adhesives and fillers (including epoxy resin, silicone, polyurethane, PU, UV and other multi-component mixing), or products with large disparity in comparison ratio, large flow requirements.
⑦Reusable, simply soak it in alcohol, thinners or other solvents after the work then it can be used in the next time.

Specifications:
Model：MA5.74-17
Mixing Ratios: 1: 1 / 2: 1
Volume: 1.3ml
Material : Plastic
Color : Clear White, Green
Length: 105mm/ 4.13"
Bell mouth inner dia.: 7mm/ 0.27"
Tip Output Diameter: 1.5mm/ 0.059"
Tube diameter: 7.5mm/ 0.3"
Package Content: 50 x Dynamic Mixing Nozzle

Instructions:
1.Load a cartridge into the glue applicator, attach a mixing tip, squeeze the trigger to advance the plunger, and out comes premixed epoxy, which you can use to fill voids, cracks and holes with ease or to put just the right amount where you need it for repairs.
2.Reuse a partially empty cartridge by removing the tip and replacing the cap to preserve the remaining glue for another day,or simply toss an empty cartridge.
3.Replace with a new cartridge and tip and keep gluing.