Feature

●Item Model Number : LF10-4H NPT1/4-95-125 PSI 20A.
●Intelligent Handle Design : The handle can be used to cut off air compressor and 4-port base simply the mountion of exhaust valve and pressure gauge.This switch features a built-in On / Off metal lever and also a unloader located on the side of the switch.
●Easy To Install : Easy to install and use, can be installed in any direction. You can also choose to add a safety valve, pressure gauge or multiple air outlets.
●Excellent Material : Switch made of high quality material, with long mechanical life,Corrosion Resistant.
●Money-back Guarantee : For any reason that youre not satisfied, you can ask for a replacement or full refund. Customer satisfaction is our pursuit.


Description

1. Suitable for most air compressor applications.

2. This valve usually has a 1/4" plastic or copper line that runs to the check valve or the head of the compressor. This switch can be used on a single stage or two stage compressor as long as the amperage is less than
20 amps on 120 volt or 12 amps on 240 volt.

3. LF10-4H is a 4-port 95-125 PSI air compressor pressure switch with an unloader control valve and On/Off switch. The pressure switch is designed for single-stage or two-stage air compressors and can pump up to 125 PSI.
The switch has a built-in "on/off" metal handle and an unloader located on the side of the switch. The unloading program is used to unload the pressure head from the compressor pump to achieve no-load start.
If the unloader is not needed it does not need to be hooked up.

4. The four-port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports. The switch is preset to turn on the compressor at 95 PSI
and turn off the compressor at 125 PSI. It can be adjusted to any pressure within the factory minimum and maximum set points listed below.

5. Packing Include: 1*LF10-4H Pressure Switch.