Feature
●They have no moving parts and are ideal for point level sensing of water.
●Installation is simple outside the tank.
●Notice:The max tank thickness is suggested 5mm and the tank material is placstic.The liquid should be clean water only.Metal tank is not proper.
●They are suitable for high, low or intermediate level detection in practically any tank, large or small.
●1 YEARS WARRANTY:EPTTECH has provided liquid detection solution for over 20 years.1 years gurranty for longterm service.
Description
Product Dimension
|
|
|
|
|---|---|---|
Unit:mmLength:380±10mm |
Waterproofing standard IP64 |
|
Installation
|
|
|
|
|---|---|---|
Screw fixationA:Water tank thickness |
Snap-on fixation |
Liquid level is higher than 1: there is water. Liquid level below 2: no water. |
Recommended Application Circuit
1）Criterion of detecting liquid level depends on the structure and thickness of clients water tank;
2）When detected liquid, the sensor will output <0.1V low voltage;
3）When detected no liquid, the sensor will output >VCC-0.1V high voltage;
Notice：
4）The sensor cant be used near metal.
5）The sensor cannot be placed in a humid environment.
