The touchless faucet adapter is a smart sensor. No need to touch the switch, just put your hand under the faucet, the adapter will sense it within 0.5 seconds and the water will flow out. The water flow will stop immediately after you remove your hand. Can achieve water saving function.
|
|
|
---|---|---|
Intelligent SensingMake sure the faucet is on before use. There is no need to turn off the faucet after use. |
AeratorThe principle of the aerator is to fully mix the flowing water and air, so that the water flow has a foaming effect, thereby achieving the purpose of saving water. |
Built-in BatteryThe touchless faucet adapter has a built-in long-lasting lithium battery that can last for 3-5 years. |
The touchless faucet adapter has a built-in 4000mAh industrial-grade lithium battery. For example, if you wash your hands 100 times a day, the battery life can reach more than 5 years.
The touchless faucet adapter has spray technology, which can increase the proportion of air in the water discharge process to make the water delicate and soft.
MCU algorithm and pulse interval sampling are used to optimize infrared sensing, reduce energy consumption and ensure the stability of products in complex environments.
|
|
|
---|---|---|
Step1:Firstly, we need to remove the aerator that comes with the faucet. |
Step2:Secondly, we need to install the quick connector of the touchless faucet adapter to the faucet. |
Step3:Finally, we attached the touchless faucet adapter to the quick connector. |
Product Model | SR-M01/SR-T01 |
Standby power consumption | 0.2mW |
Ambient temperature | 1-55°C |
Working water | 0.05-0.6MPa |
Sensing distance | 0-8cm |
Waterproof rating | IPX6 |
Battery capacity | 4000mAh Working time 5 years |
Standard connection adapters | Male 1 X M24,1 X M22,1 X M20 / Female 1 X M22,1 X M20,1 X G1/2 |