Feature

●The Notch 1/2" Rigging Block with Ultra Sling is a small sized lightweight arborist block that accepts working lines up to 1/2” (13mm) diameter
●Low profile, secure, easy-to-open captive screw pin lock with a high wall, a full diameter and improved anchor sling protection
●Hot forged aluminum side plates with rope friendly rounded cheeks and precision CNC machined aluminum sheaves with wide bend radii
●Wide, concave upper sheave with a 5/8” anchor sling. Flared side-plates reduce twisting in complex rigging scenarios. Upper sheave diameter: .75 in. (19mm), lower sheave diameter: 1.5 in. (38mm)
●Working Load Limit: (WLL) 20 kN (4,496 lbs.) MBS: 100 kN (22,480 lbs.)


Description

The Notch 1/2" Rigging Block with Ultra Sling is a small sized lightweight arborist block that accepts working lines up to 1/2” (13mm) diameter. Made with 12 strand 5/8" Samson Tenex Tec rope. A rigging block is installed and captured in the terminal eye of the sling. This rigging sling easily adjusts in length using the spliced pockets located at fixed intervals. 6 overall length. The Notch 1/2" Rigging Block is a small sized lightweight arborist block accepts working lines up to 1/2” (13mm) diameter. Hot forged aluminum side plates with rope friendly rounded cheeks. Precision CNC machined aluminum sheaves with wide bend radii. Stainless steel axle. Low profile, secure, easy to-open captive screw pin lock. High wall, full diameter, improved anchor sling protection. Wide, concave upper sheave with a 5/8” anchor sling. Flared side-plates reduce twisting in complex rigging scenarios. Upper sheave diameter: .75 in. (19mm), lower sheave diameter: 1.5 in. (38mm). MBS: 22,480 lbs. (100 kN) Working Load Limit: 4,496 lbs. (20 kN)