Feature(may vary by option.)
●【Description 】This series of hob cutters all adopt automatic paperweight design, self-sharpening roller blades and sharpened lower blades, so that the hob cutters are automatically sharpened and durable. The cutting size displayed in centimeters and inches is more accurate, convenient and fast. Avoid the phenomenon of paper transfer and paper feeding. The cut product has no burrs, which is an effect that ordinary cutters cannot achieve.
●【High Quality Material】In order to improve the overall strength of the product, the rolling cutter adopts metal structure, and the main parts adopt high-strength tool steel to ensure the service life, cutting accuracy, straightness and smoothness of cutting.
●【Main Purpose】Rolling paper cutter is an indispensable tool for cutting all kinds of photo paper, film, art card paper, hot and cold laminating paper, thin plastic board and thin copper sheet.
●【Application】Paper cutters are commonly used office supplies in photo studios, photo studios, typing and copying houses, cultural offices, small and medium-sized enterprises, etc. The paper cutter can be used to accurately cut photo paper, plastic and other materials. Make your binding uniform, high-end and beautiful.
●【WARRANTY】 if any questions during installation or operation, plaese contact our customer service and they will handle your problem imediately!
[24inch]
Description
Parameter:
Model: 24 inch
Cutting: 61CM
Discretion: 2mm
Cutting table: 80*31.5cm The blade is sharp, not only can you cut ten copies of the paper at a time. PVC cards are also easily cut off.
Cautions:
1. When cutting, the knife box should be evenly applied along the direction of the guide rod, and never force in other directions.
2. After the work is finished, please park the knife box at one end of the guide rod.
3, For your safety, please do not touch the blade by hand
4, The blade generally does not need to be replaced, but when the blade is notched or deformed and the knife edge becomes dull and cannot be used, the blade needs to be replaced.
Blade replacement steps:
1. When the model is 24 inches or larger, move the knife box (3) to the center of the table, and directly flip the knife box to the outside of the table to make the blade in the visible position, but not too strong, so as not to guide The rod is deformed.
2. Use a micro-slotted screwdriver to remove the top screw (1) from the knife box, and then use a wire cutter to gently pull the fixed shaft (8) down to remove the die (5).
3. Insert the special wrench into the hole of the die and the round nut, and rotate it counterclockwise to remove the blade.
4. When loading the knife box, the plane of the blade is close to the lower blade, and the chamfered surface of the blade should be outward.
The package includes:
1*24 inch rolling cutter