Feature

●【Application】: Great fixture for squaring rings in the bore prior to setting end gaps. Covers bores from 2″-5″ so that you can consistently and accurately measure piston ring end gap.Places rings 1” below the deck to get past head bolt distortion
●【Material】：Made of anodized 7075 aluminum and stainless steel hardware，strong enough hardness to prevent wear and tear, and can be used for life.
●【Feature】: Made of high quality material and adjusts to many bore sizes; Simple to use with or without head studs in place.
●【To use】: Loosen thumbscrews slightly and insert the three round pegs into cylinder bore until the bottom body of the tool rests flat against the cylinder deck. Slide pegs outward to gently meet the inside of the cylinder bore walls, and tighten thumbscrews. Remove tool and insert piston ring into cylinder bore.


Description

Usage steps:

1.Loosen thumbscrews slightly and insert the three round pegs into cylinder bore until the bottom body of the tool rests flat against the cylinder deck.

2.Slide pegs outward to gently meet the inside of the cylinder bore walls, and tighten thumbscrews.

3.Remove tool and insert piston ring into cylinder bore.

4.Use ring squaring tool to push ring down evenly until body of tool is flat against cylinder deck.