Step 1 - 1.Drill a hole of 10mm in depth with a 9mm drill bit on board A.
- 2. Insert the plastic nut into the 9mm holethen screwthe dowelinto the plastic nut.
|
Step 2 - 3.Drilla hole of 15mm in diameter on board B.
- 4.Drill a hole of 7mmin diameterin the side of board B, make it connect to the 15mm hole.
|
Step 3 - 5.Align the 7mm hole on board B with the dowel on board A, put the cam lock fitting into the 15mm hole on board Bandthen tighten the cam lock fitting with a Phillips screwdriver to fasten the two boards.
|