Feature

●💎Made of aluminum alloy, lightweight design for portable and fast work,make one-person operation easier,
●💎Develops 66KN of hydraulic force for easy punching,even in 3.5mm mild steel
●💎Round Knockout Punches: 1/2",3/4",1",1 1/4", 1 1/2",2"
●💎Allow unlimited driver orientation to simplify access to work area.
●💎Comes in Anodized Finish.Supplied with Spare Seal Kit.


Description

Knockout Punch SetKnockout Punch Set

Knockout Punch Set TPA-8

  • Made of aluminum alloy, lightweight.
  • Knockout Punches: 1/2",3/4",1",1 1/4", 1 1/2",2"

iGeelee Knockout Hole PuncheriGeelee Knockout Hole Puncher

Hydraulic Knockout Hole Punch Driver Kit

  • Punching range: Φ0.88-2.42 inch in the 0.14 inch mild steel
  • Punching force:69KN
  • Stroke:0.86 inch
  • Length:12.2 inch
  • Weight:4.85 lb
  • Package: plastic box
  • Weight of box:2.64 lb
  • ACCESSORIES: Round Knockout Punches: 1/2",3/4",1",1 1/4", 1 1/2",2"

Content Includes

  • 1x Hole Puncher
  • 6x Punch Dies
  • 1x Spacer
  • 1x 7/16"3/4"Draw Stud
  • 1x 3/4"x3/4" Draw Stud
  • 1x Sealing Kit
  • 1x Plastic box
  • 1x English Manual

How To Punch The Metal Sheet?

360 Rotary head of the hole puncher360 Rotary head of the hole puncher

Handle Pressure Release of knockout puncherHandle Pressure Release of knockout puncher

Hydraulic Knockout Punch SetHydraulic Knockout Punch Set

Step 1

  • Rotate the punch head 360 degrees.

Step 2

  • Release the valve pressure of the knockout punch kit.

Step 3

  • Screw the punch draw stud.
  • Place the die on the draw stud.
  • Put the spacer on punch draw sud.

iGeeelee Hydraulic Knockout Punch SetiGeeelee Hydraulic Knockout Punch Set

iGeelee Hydraulic Knockout Punch KitiGeelee Hydraulic Knockout Punch Kit

Hydraulic Knockout Hole PunchHydraulic Knockout Hole Punch

Step 4

  • Let the pilot hole of material through the punch draw stud.
  • Place the punch onto the draw stud until it is tight, if the punch is not tight enough, the hole may not be completed.

Step 5

  • Turn the pressure valve off.
  • Pump the handle until the punch is completely through the material.

Step 6

  • Take out the slug.
  • Release the turn screw.

Whats in the box

  • Hole Punches