Feature

●5 ANGLES ADJUSTABLE --- RIVOODS shower holder offers 5 positions adjustment which enables you to find more enjoyable angles and then return the showerhead to its vertical position.It clicks to different settings smoothly and it does not move out of the setting you set it to when its supporting a heavy shower head.
●90 DEGREE DOWNWARD---Thanks to the smart design - movable lower part, now you can adjust the shower head in 90° downwards position which allows you even sit on a chair while showering after an exhausting day, or Washing your dog without water splashing everywhere. RIVOODS team believe this is a important feature for a shower spayer holder.
●FITS LARGER SHOWER HEAD : Unlike those Tiny shower head holders, this shower holder designed for bearing larger, heavy, metal shower heads, both the strong permanent fixture and Adjusting construction are designed for heavy bearing.
●WIDER SLOT FOR UNIVERSAL FITS: It comes with Wider slot (0.92 inch vs regular 0.88 inch) to fits most of the shower hose connector. We provide 2x extra thicker Gaskets for thinner shower hose connector, if your shower head sits loosely on the slot.
●SUCTION ASSISTED ADHESION--- Based on our tests, suction alone is not strong enough to hold handleheld shower head on the wall under the wet condition of bathroom, our solution is to create suction to assist adhesion which then brings maximum attachment on wall to solve falling off issue with regular suction cup, it can be ready to use immediately, no need to wait 48 hours to dry like regular adhesive shower holder. It can removed without leftover residue, not damaging your wall.
●POROUS SURFACE--- The suction shower holder can be wall mounted easily on the flat, smooth surface like tiles, glass, marble etc, it can also be attached onto the slightly textured surface like fiber glass, metal, plastic, wood,granite etc. Follow our video how to install it correctly. Attention: The sucker diameter is 7.5cm, please make sure it wont cross the grout lines


Description

RIVOODS holders selection

adhesive shower head holder adjustable 5 positions

Adhesive shower holder

suction shower hand holder adjustable in 5 angles

Suction shower holder

shower wand holder 360 adjustable

Shower head holder 360

shower head holder chrome

Shower head holder Mini

Customer Reviews
4.1 out of 5 stars
304
4.3 out of 5 stars
323
4.2 out of 5 stars
187
4.4 out of 5 stars
226
Price
$15.98 $16.98 $13.97 $9.98
Color
Chrome Chrome Chrome/Black Chrome/black/White/Gun Metal
Adjustability
5 angles tilt 5 angles tilt 360 adjustable 5 angles tilt
Horrizontal setting
✔ ✔ ✔ ✘
Mounting Way
Suction assisted Adhesive Suction cup Adhesive Adhesive + Slide fit
Applicable surface
Smooth / slight textured Smooth surface only Smooth / slight textured Smooth / slight textured
Large shower head fits
✔ ✔ ✘ ✘

Can I use this shower holder on slightly textured wall?

Yes, but not too textured, must be hard wall, still stays best on smooth surface.

Will it fit my shower head/shower hose?

The slot is universal, should fit 99% shower head/shower hose in the market, if you want to be 100% sure, measure you shower hose connector diameter, make sure it is less than 0.92 inch.

How can I adjust it to horizontal angle so I can wash my dogs easily?

Easy, rotate the low part of the holder to the side, and adjust the angle to the lowest, then you will have 90 degree downwards position.

My shower head is larger, will it fits my large shower head or it is strong enough to bear it?

Yes, definitely, this holder was designed to support all handheld shower head, even those large, made of metal, also the slot is slightly bigger to fits most of the shower hose connector.

Can I remove it without damaging my wall?

Yes, it is strong acylics adhesion, use a knife to slowly cut a small gap and spray some warm soap water into it while cutting it further down. it may take 5 mintues, as the adhesive is very strong.

Product information