[M8x60mm Silver]
[M6x60mm Silver]
Specification
Package: 8Pcs M6x60mm Expansion Bolts
Material: 304 Stainless Steel
Type : Hex Nut, Sleeve Anchor
Total Length: 60mm / 2.4inch
Thread Diameter: 6mm / 0.24inch
Washer Outer Diameter: 12mm / 0.47inch
Expansion Tube Size: 39x10mm / 1.5x0.4inch (Length*Dia.)
Hex Nut Size: 10x5mm / 0.4x0.2inch (Dia.*High)
The Principle of Expansion Screw Bolt
- Expansion is created by tightening a threaded bolt which draws a tapered cone expanding a sleeve against the walls of the hole.
- The purpose of a secure and reliable fixing of items and fixtures to concrete, brick, walls any solid surface really of heavy items and fitments.
How to Use
1. Drill a 10 mm hole in the wall with drill bit.
2. Put M6x60mm expansion bolt into the hole and tighten the hex nut with wrench.
3. The expansion pipe will open the tail to catch the wall after stressing, but make sure the expansion screw can not be pulled out.
4. Screw in the nut to complete the installation.
Knidly Note: Please allow 1-2cm errors due to manual measurement, thank you for your understanding!