Feature(may vary by option.)

●【PoE & IP OVER COAX CONVERTER】LINOVISION’s POE IP Over Coax converter can be used to upgrade analog system to IP surveillance system while using existing coaxial cable. Compatible with RG59, RG6, RG11 cables. Supports POE standards 802.3af (PoE) and 802.3at (PoE+). EOC Receiver MUST be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices
●【POE & IP OVER TWIST PAIR CONVERTER】 Each pair of EOC(Ethernet over Coax) Converter is equipped with 2 BNC to Twist Pair connectors, which enables POE over Twist Pair transmission. 100Mbps bandwidth over 330ft regular twist pair cables while 10Mbps over 1485ft for both POE or NON-POE devices. It’s ideal for the CCTV system in elevator cart.
●【INDUSTRIAL DESIGN WITH BUILT-IN HEAT SINK】Industrial design, with built-in heat sink, ensure super reliability and hassle free transmission. Indoor use ONLY. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.
●【POINT TO POINT CONNECTION ONLY】Act as MoCA (Multimedia over Coax) in point-to-point connection, transmit video/audio/data/control signal over coaxial cable, so as being used with twist pair. EOC Receiver should be powered by POE switch or POE injector while Transmitter should be connected with POE devices or NON-POE devices.
●【WORRY FREE】1 year warranty, US local technical support + Global after-hour support.

[10 pack]

[Waterproof Enclosure Only]

[1 pack]

[5 pack]

Description

Video Player is loading.

Current Time 0:00

Duration 0:23

Loaded: 56.44%

Stream Type LIVE

Remaining Time 0:23

LINOVISION EOC&POE converter transmits IP Video & Audio & Data & POE Power over coax cable.Upgrade traditional analogue video surveillance system to IP surveillance system without replacing coaxial cable. It is working with POE IP camera, POE Wi-FiAP, VoIPphone, etc.Plug-and-play.Configuration free.

Unique Features Compared with Competitors

Industrial design

Industrial design, with built-in heat sink Ensure super reliability and hassle-free transmission.

POE power + Data transmission

It can Provide power to remote POE device with max. 30W and no local DC power adapter is required. （Note: The POE OUT Port only support PoE Mode A）

Transmission Performance

Compatible to IEEE802.3af/IEEE802.3at POE protocol, max21W POE load capacity in 100m(330ft), or 11W POE load capacity in 300m(1000ft).

DIN-Rail Installation

DIN-Rail Installation. Plug-and-play, configuration free, makes installation simplest. Small design (3.1"x2.0"x0.9") and light weight.

General EOC Applications

Upgrade traditional analogue video surveillance system to IP surveillance system with existing coaxial cable at max 3,000ft distance.Up to100Mbps bandwidth over 1,000 feet regular coax cable transmission, working with CCA/CCU RG59/RG6 cable

1 Over Twisted Pair Cable 2 Application for Non-POE 3 For VoIPPhone 4 For DC12V Device 5 Long Reach PoE

Application in Elevator

It can transmit POE power and IP data over coaxial or twist pair cable. One passive EOC-transmitter will be put inside the elevator cart to feed camera or signal board, and one EOC-receiver will be in the control room, powered by POE switch/POE injector/POE NVR.

Why my POE device is offline when working with our EOC (IP Over Coax) Converter?

Several main reasons are as follow:

1.Reverse connection.

2.Point-to-point coax cable direct connection ONLY.

3.Insufficient load capacity: Suggest 802.3at (PoE+)

4. No power supply.

What kind of cables can be connected between EOC transmitter and EOC receiver?

It can transmitter ethernet data and POE power over coaxial cables, twist pair cables, power cables, video cables or almost any two-pin cables.

Do EOC Receiver & EOC Transmitter need power?

They do not need extra power. Just connect as the connection pictures have shown.

Will this work for extending connectivity between a router and an Ethernet switch? Or extending WIFI?

Yes. But you need a POE injector in EOC receiver side to provide power to EOC receiver and EOC transmitter. It is recommended to use 56V 30W POE injector.

Can multiple devices be connected via single coaxial cable?

Yes. The connection will be multiple device -> NVR/POE switch/WI-FI AP -> EOC Transmitter -> Coaxial cable ->EOC Receiver -> POE NVR/POE Switch/POE Injector with internet.

Similar Products Comparison

	POE over Coax Converter	Waterproof Transmitter	EOC Converter(5 Pack)	EOC Converter(10 Pack)	Converter+POE Extender	EOC Converter +POE Switch	8 Port EOC Switch Kit
Input	POE Standard	POE Standard	POE Standard	POE Standard	POE Standard	POE Standard	DC48V~57V+Ethernet
IEEE802.3af/IEEE802.3at	√	√	√	√	√	√	√
Port Supports POE over Coax	√	√	√	√	√	√	8 Ports, Port1&5 HiPOE Max60W
Power Budget	/	/	/	/	/	120W	120W
Compatible Cable	RG59/RG6 Coax+Twist Pair Cable	RG59/RG6 Coax+Twist Pair Cable	RG59/RG6 Coax+Twist Pair Cable	RG59/RG6 Coax+Twist Pair Cable	RG59/RG6 Coax+Twist Pair Cable	RG59/RG6 Coax+Twist Pair Cable	RG59/RG6 Coax+Twist Pair Cable
Longest Transmission Distance	3000ft	3000ft	3000ft	3000ft	3000ft	3000ft	3000ft
Plug&Play	√	√	√	√	√	√	√
Package	1*EOC-Converter	1*Waterproof EOC Transmitter	5*EOC-Converter	10*EOC-Converter	1*EOC-Converter+POE-Extender02	EOC-Converter + POE Switch	1 EOC Switch + 6 Transmissters