Feature

●PRE-ASSEMBLED-Ready to install; no setting tools required
●READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used
●INTERNAL THREADS-Bolt can be removed easily
●BOLT EXPANDS ANCHOR-No need for setting tools; fast and easy to install
●CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications


Description

Applications
The anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.

Environment
The anchor is designed for use in a Moist environment.

Hole Diameter/Bit Diameter
The anchor requires a 7/8" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Minimum Embedment
The minimum anchor embedment into the concrete is 2". Therefore, the anchor must be installed so that a minimum of 2" of the anchor is embedded into the concrete.

Spacing between Anchors
Each anchor must be spaced a minimum distance of 8-3/4" from each other when measured center to center.

Edge Distance
It is very important not to install the anchor any closer than 4-3/8" from an unsupported edge of the concrete.