Feature(may vary by option.)

●Size - Thread Size: M12 x 1.75; Effective Length (after Installation): 3D=36mm; Type: Helical
●Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
●Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
●Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
●Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.

[M14 x 2]




[M5 x 0.8]




[M2.5 x 0.5]




[M10 x 1.5]




[M8 x 1.25]




[M12 x 1.75]




[M4 x 0.7]




[M6 x 1]





Description

Thread InsertsThread Inserts

Information

Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood.

When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.

Thread InsertsThread Inserts

11

11

304 Stainless Steel

Good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.

Special Design

Features a certain of elastic, and provides an even load on the thread. Wire thread inserts have self-tapping capability without pre-tapping the base metal.

Wide Applications

Greatly improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage, and repair damaged internal threaded holes.

Notes

When the installation amount is large, use special installation tools to install. Drill holes with the appropriate size drill bit, then tap with the same size tap as the bolt.

Put the screw sleeve on the installation tool and adjust the height of the pipe position. Gently screw the screw sleeve into the hole until the end of the screw sleeve is between 1/2 and 1/4 of the plane of the screw hole. Twist the crossed wires with the break tool instead of the installation tool.

Inserts Inserts Inserts inserts inserts inserts
Wire Thread Inserts Wire Thread Inserts Wire Thread Inserts Wire Thread Inserts Wire Thread Inserts Wire Thread Inserts
See Details
See Details
See Details
Customer Reviews
—
1.0 out of 5 stars
1
5.0 out of 5 stars
1
4.6 out of 5 stars
3
—
—
Price $7.29 — $14.79 $8.09 — —
Thread Size M10 x 1.5 M6 x 1 M14 x 2 M12 x 1.75 M3 x 0.5 M8 x 1.25
Effective Length 2D (20mm) 2.5D (15mm) 2D (28mm) 3D (36mm) 2.5D (7.5mm) 1.5D (12mm)