Feature(may vary by option.)
●Aluminium Oxide abrasive is preferred for DIY use as it is the most cost effective product for most DIY applications.
●Designed for use on rust, paint, steel, and non-ferrous metals, along with any other surface that needs sanding
●High performance aluminum oxide with abrasive for extended disc life while also offering an aggressive cut
●Applicable for grinding, stock removal, weld blending, debarring / def-lashing, rust removal, blending, cleaning and finishing
●Grit 40: for aluminium and other soft non-ferrous metals, wood and plastics.
[Mixed 40 Pack]
[60 Grit]
[240 Grit]
[320 Grit]
[80 Grit]
[120 Grit]
[40 Grit]
[Mixed 20 Pack]
Description
KSEIBI Sanding and Grinding Flap Disc
Tough & Sturdy Construction
- Three-dimensional grinding discs with overlapping layers of abrasive-coated, fiber-reinforced flaps that fan out from a central hub. As the overlapping layers of the flaps wear away, they continuously expose fresh abrasive mineral for a fast, consistent cut, while the cushioning of the flaps creates a smooth finish.
- Under normal conditions, flap discs will generate a finish that is one grade finer than the finish of a fiber disc of the same grade. And, because their overlapping construction allows more abrasive material to be loaded onto the cutting surface, they far outlast typical discs.
- By reducing steps and lasting longer, flap discs can greatly improve productivity in grinding operations.
KSEIBI Aluminum Oxide Flap Disc 4-1/2 Inch 10 Pack
High Strength Aluminum Oxide:
- Aluminum Oxide it is the most widely used abrasive grain in sand blast finishing and surface preparation because of its cost, longevity and hardness. Harder than other commonly used blasting materials, aluminum oxide grit powder penetrates and cuts even the hardest metals and sintered carbide.
About Flap Disc
Flap discs do double-duty. They can replace bonded wheels and fiber discs because they grind and finish in a single step, making them a time and cost-saving solution in a wide range of applications, particularly where final finish and gouge-resistance are important.Use them for weld grinding, deburring, rust removal, edge grinding, and weld seam blendin
- KSEIBI Flap Discs are designed for use on portable grinders and sanders, and are increasingly popular as an alternative to abrasive fiber discs.
- They complement the use of depressed center grinding wheels, and are the preferred option on light gauge sheet metal or stainless steel where finish is important.
- They are manufactured using a high performance Aluminum Oxide making it uselful for all your grinding and polishing needs.
- Ideal for: weld grinding, deburring, rust and paint removal, edge grinding, and weld seam blending
You should know before you buy Sanding Disc
This flap disc are recommended to use for grinding and polishing metal / stainless steel, yet they still can be used on mild steel, wood, and plastic.
Size Details:
- The KSEIBI flap disc is a 4-1/2 in. x 7/8 in.-11 (Type 27) Flap Disc, for grind and finish in one operation, can use it with most command angle grinders 4.5 Inch
Grit Conversion:
Always choose a Flap Disc at least ONE GRADE COARSER than the Fibre Disc being used to obtain a similar finish with the same aggression:
- FIBRE DISC\ P180 P100 P80 P60
- FLAP DISC \ P120 P80 P60 P40
