Feature
●STARLINK antenna snaps Into the adapter,Perfectly Fits like the original Starlink mounting base,seamlessly connect your Starlink V2 satellite internet to existing infrastructure.
●Suggested range of use for pipe Mounts and other Antenna Mounting Pole Minimum diameter of 0.98inch/25mmMaximum diameter is 1.45inch/37mm.
●Easy Installation-No drilling required,for Mounting the Gen 2 Starlink Rectangular Dish Antenna to Any J Pipe Antenna Mount.Accommodates up to 1" top inner diameter and 1.45"bottom inner diameter.
●Hollow round tube stainless-Run the Starlink Cable Inside the Mount or Along the Outside,offers a secure and stable attachment, keeping your equipment firmly in place.
●Fully suitable for starlink pole installation, with starlink pole jack,Just insert.VTUIFBT adapter has four fixing screws on the top and bottom, which are reinforced at a 90° right angle and can withstand 200Ibs force, providing a safe and stable connection to keep your device firmly in place.
Description
Starlink Antenna Adapter
- 1x Starlink Adapter
- 2x M6*8 Bolts
- 2x M6*16 bolts
|
|
|
|
|
|---|---|---|---|
1.Press and hold the starlinks button against the connectors tab to it. |
2.Once aligned, install the bayonet and hear a "ding" sound, indicating successful installation. |
3.Tighten the socket head cap screws and tighten as needed. |
4.Installation is complete. |
VTUIFBT Adapter allows you to seamlessly connect your Starlink satellite dish to pipes with Minimum diameter of 1inch/25mm,Maximum diameter is 1.45inch/37mm.
