Feature●Support motor voltage from 7V to 35VDC●Maximum current up to 80A peak (1 second), 30A continuous, each channel●On board MOSFETs are switched at 18 KHz for quiet operation●Regenerative Braking●Accepts RC (Radio Control), PWM, Analog voltage, UART dataDescription
Using DC Power Supply only may DAMAGE the driver. Use battery instead.
This motor driver is suited for a brushed dc motor with the following specifications:
- Operating voltage from 7V to 35VDC
- Rated Current <= 30A
- Peak Current <= 80A
Features:
- Bi-directional control for dual brushed DC motor.
- Support motor voltage from 7V to 35VDC.
- Maximum current up to 80A peak (1 second), 30A continuous, each channel.
- On board MOSFETs are switched at 18 KHz for quiet operation.
- Regenerative Braking.
- On board Error LEDs to indicate: (each channel)
- Input Error (Blinks 2 times)
- Under Voltage Warning (Blinks 3 times)
- Over Voltage Protection (Blinks 4 times)
- Over Temperature Protection (Blinks 5 times)
- Thermal protection.
- Current limit protection.
- Multiple input modes:
- RC (Radio Control)
- Analog voltage from potentiometer/variable resistor/joystick
- PWM and DIR (sign-magnitude and locked-antiphase) from microcontroller
- Serial Simplified or Serial Packetized from microcontroller
- GROVE compatible connectors for control input.
- RC (Radio Control) friendly connectors.
- On board push buttons for fast test and manual operation.
- On board LED indicators for Error, RUN, Over current, motor output, for each channel.
- THIS MOTOR DRIVER DOES NOT HAVE A REVERSE POLARITY PROTECTION
- Dimension: 81.28mm(W) x 101.60mm (L) x 42mm (H)