Feature

●Model Name: Mach3 USB Motion Card; 4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives.
●This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify (Notice: Doesnt support Win8/win10/macOS system !!!) .
●Signal Output:0-10V, it can control the spindle motor speed through using mach3 software.
●If you are not familiar with the product and software features, make sure the machines power switch on hand, you can quickly turn off the power.
●Recommends that users install the emergency stop button and make sure the button is functioning properly.


Description

4 axis mach3 usb motion card4 axis mach3 usb motion card
cnc motion controller,cnc motion controller,

Package Including

  • 1×Mach3 USB Motion Card
  • 1× USB Cable

usb cnc mach 3 controllerusb cnc mach 3 controller
nema 23 stepper motornema 23 stepper motor

cnc breakout boardcnc breakout board

  • Support automatic probe tool
  • Support Emergency input
  • Support for limit switch (It is recommended that the limit switch and emergency stop switch must be installed first and can be used normally.)
  • Support for connecting electronic handwheel

  • 1 status LED, indicate connection status on the board.
  • Have 0-10V output port, you can use mach3 software to control the spindle motor speed.
  • Support for 4-axis linkage, you can connect four stepper motor drives or servo drives.

USB MACH3 Motion Control Card

Features

  1. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor.
  2. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.
  3. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device.
  4. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device

  • The motion control card for machine control, with strong professional.Requires the operator to have the relevant expertise!
  • Please strictly follow the instructions and warnings before using this product.
  • If you are not familiar with the product and software features, make sure the machines power switch on hand, you can quickly turn off the power.
4 axis cnc kit4 axis cnc kit

cnc motor kitcnc motor kit

step motor kitstep motor kit

stepper motor controllerstepper motor controller

4 axis cnc controller kit4 axis cnc controller kit

Note:

The inverter interface (AVI +, AVI-) is isolated from the computer and the main control circuit, and has strong anti-interference ability. No interference signal will be introduced due to the introduction of external strong electrical equipment. This interface can output 0 ~ 10V analog signals, and can also be configured as 0 ~ 5V output. It is recommended that the limit switch and emergency stop switch must be installed first. If these protection switches are not installed, in an emergency, in addition to pressing the emergency stop to return (sometimes too late to press), and turning off the motor power (sometimes too late to turn off), the most convenient way to stop is to pull the USB cable !! As long as the USB cable is pulled, the machine will automatically stop! !! !!

Looking for specific info?