Feature

●hall current sensor wcs1700 hall current sensor hall effect switch circuit
●Working voltage: DC 12V
●Output mode: relay output; analog output; level signal output.
●Output overcurrent relay normally open normally closed output;
●Sampling current conversion analog signal output, which can be connected to ADC;


Description

Feature

1. With signal output indicator;

2. Wide current detection range DC:0-70A; detection range (error) Max±0.01A

3. Output overcurrent relay normally open normally closed output;

4. The full range of over-current signal setting is adjustable;

5. With mounting holes, it is convenient for firmware installation;

6. Sampling current conversion analog signal output, which can be connected to ADC;

7. TTL level signal and relay signal cannot coexist at the same time, only one of them can be used. The high level of TTL level signal output is the power supply voltage, and the low level is zero;

8. Except for the threshold adjustment potentiometer, the other two potentiometers on the module are prohibited from being adjusted. Those who do not listen will cause damage to the module.

Parameter

WCS1700 detection range DC0-70A
Working voltage DC 12V / 24V
Output mode 1, Relay output; 2，Analog output (linear output 0-5V corresponds to 0-1A 7.5A 30A 35A 70A); 3，Level signal output.
Size 72mm*45mm*23mm (module only); 89mm*48mm*56mm (with base);
wcs1700 hall effect current sensorwcs1700 hall effect current sensor

Note

The module factory inspection is based on a pure resistance load test. There will be deviations when detecting inductive or capacitive loads. Please calibrate it yourself.