CrocSee AC Current Switch is designed for AC current monitoring, motor overload protection, automatic control system and other applications. This device senses a current draw of between 1amp and 50 amps and closes a set of contacts while AC current is passing through sensor.
Main Specifications:
- Enclosure Dimensions(LxWxH): 88 x 25 x 50mm; Or approx. 3.46 x 0.98 x 1.97 inch
- Sensor Hole Diameter: 20mm (0.79 inch)
- Mounting Holes: 2x5mm holes spaced 76mm on base (2 x 0.19”holes spaced 3”on base)
- Voltage Range: 120-240VAC
- Switch Rating: 2.5 A @ 120 VAC/240VAC (Only works with AC current, not for DC current)
- Contact Type:Normally Open
- Operating Temperature: -20 to 45℃(-4 to 113℉)
- Humidity Limits: 0-95% RH, non-condensing
- Response Time: ≤200ms
- Accuracy: 1%
- Hysteresis: ≤1%
NOTE:
- Disconnect and lock-out all power sources prior to installation.
- The current switch has a rating of 2.5 Amps maximum. If the secondary device (which is conncted with the switch) draws more than 2.5 Amps, then you will need a separate high current relay.
- A load must be applied across the NO switch to work. If no load is applied across the NO switch, these NO terminals will not close with correct operating primary current.
- The switching current is NOT calibratable. However, it is sensitive enough to detect any current draw of between 1amp and 50 amps.
Package includes:
- 1x AC Current Switch
- 1x Instruction Manual