Feature

●【Size】Cutting Diameter: 18mm, Pitch: 1mm, Cutting Direction: Right Hand.
●【Feature】Spiral Flute design, upward chip discharge, more suitable for machining sticky materials. Made of 6542 high-speed steel, high hardness and toughness.
●【Application】Make or repair thread, suitable for most metals, copper, alloy steel, cast iron, aluminum, A3 steel etc.
●【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
●【Package Included】1pc M18X1mm Titanium Coated Spiral Flute Tap.


Description

Size: M18x1.0 Spiral Flute Thread Taps.
Cutting Direction: Right Hand.
Material: HSS 6542.
Finish Type: Titanium Coated.

Spiral Flute Thread Taps
Spiral Flute design, upward chip discharge, suitable for blind hole processing and sticky material processing.

Easy to Use
It can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc.

Control the speed according to the hardness of the material. The higher the hardness of the processed product, the slower the speed.
Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Tips
1. Before tapping confirm whether the diameter of the round hole is appropriate, and to take protective measures when working.
2. When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss. If it encounters difficulty in rotation, the tapping should be suspended.
3. Be sure to select the appropriate cutting oil for the complex tapping process and apply anti-rust oil for maintenance after use.