Feature

●✍ Fits for 14" Band Saws and 24" Scroll Saws. Compatible with numbers parts 426-02-063-0001, 426-02-063-0002.
●✍Size: Diameter: 2.5 inch, Thickness: 0.1 inch. (Please measure the saw blade to ensure proper size.)
●✍Fit for Delta, Rockwell, some Jet, Ridgid, Grizzly, and other imports.
●✍Install: First make sure the edges of the hole are free of dirt. If the table dowel pin is not tight or missing, usually the blade mounting slot will close somewhat over time, which will slightly reduce the diameter of the insertion hole. Tap a flathead screwdriver into the blade mounting slot a little to wedge it open. This will allow you to put the insertion hole in.
●✍Note: Make sure your insert grooves have dowel pins on the side, not on the rear.


Description

14" Band Saw / Scroll Saw Table Inserts for 14" Band Saws and 24" Scroll Saws Compatible Parts 426-02-063-0001, 426-02-063-0002

First make sure the edges of the hole are free of dirt. If the table dowel pin is not tight or missing, usually the blade mounting slot will close somewhat over time, which will slightly reduce the diameter of the insertion hole. Tap a flathead screwdriver into the blade mounting slot a little to wedge it open. This will allow you to put the insertion hole in.