Feature(may vary by option.)

●APPLIANCE MONITORING: Comes with three 80A sensors to accurately monitor your air conditioner, furnace, water heater, washer, dryer etc. Support linkage with other tuya.
●ENERGY MONITORING: Monitor your homes real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. measure Voltage, Current, PowerFactor.
●REAL-TIME ENERGY DATA: Only support 2.4 GHz WIFI with an internet connection to monitor energy use with phone app. Provide 2-second data and are accurate from±2%.
●EASY TO USE: Lightweight and easy to install,PC321-TY Power Clamp helps you monitor the amount of electricity usage in your facility by connecting the clamp on to the power cable.install SmartLife APP. 80A (optional): 10mm.
●IMPORTANT SAFETY INFORMATION:The power clamp must be installed and serviced only by a qualified ,Do not touch the terminals of the device during testing and turn off all the power supply for this equipment before installing.Keep you safe.

[321-200A]




[321-80A]




[321-120A]





Description

smart home energy monitorsmart home energy monitor

WiFi Smart Energy Meter,take command of your energy use.

3-phase clamp mete3-phase clamp mete

For 80A-300A CT item, Real time monitor total current, power and KWh , and also show A, B, C each phase voltage , current, power and KWh consumption

energy monitor home powerenergy monitor home power

For 80A-300A CT item, electric stastic , it can record hourly ,daily,monthly and yearly power consumped KWh value for Total and each phase separately.

monitor electricity usagemonitor electricity usage

home automation energy monitorhome automation energy monitor

automation energy monitor senseautomation energy monitor sense

energy monitor emporiaenergy monitor emporia

The Power Clamp has a mounting bracket for mounting purposes.

1. Use the mounting bracket as template to mark the two holes on the wall for installing screws.

2. Screw the mounting bracket onto the wall according to marked location. Install wall plugs if necessary.

3. Locate the hooks of the mounting bracket and line up the hooks with the mounting holes on the Power Clamp. Fit the hooks into the mounting holes as the picture below. Installation is now completed.

Attach both ends of the Current Transformer Cables first like the picture shown below. Then spinning the waterproof latch clockwise until both ends have been tightened and secured.

Open the clamp as shown below. Apply it on the electric meter cable. The arrow on the clamp should face to the correct direction of the electricity current flows (P1→P2or K→L). If the arrow faces the reverse direction, the reading meter will display 0.

11

Technical Specifications

Wi-Fi 802.11 B/G/N20/N40
RF Characteristics Operating frequency: 2.4GHz
Operating Voltage 100~240 Vac 50/60 Hz
Calibrated Metering Accuracy • ≤ 100W ( Within ±2W ) • >100W ( Within ±2% )
CT Provided CT 80A (default) • CT 120A/200A/300A(optional)
Operating environment Temperature: -20 ℃~ +55 ℃ • Humidity: ≤ 90% non-condensing
Dimension 86(L) x 86(W) x 37(H) mm

Looking for specific info?

Product information